IPsec VPN

There is a IPsec VPN Amahi application fro your HDA. This VPN stack requires two port to be forwarded from your router to your HDA. These are

 500 UDP and 4500 UDP

Not TCP.

iOS Setup

Go to Settings > Network > VPN > IPSec, enter the settings below and click on Save.

• Description: Amahi IPSec VPN
• Server: YOURNICK.yourhda.com (put your Amahi dyndns address, nickname and host)
• Account: USERNAME
• Password: leave it as "Ask Every Time" or put one if you feel it's safe to leave it there
• Use Certificate: leave it as OFF
• Group Name: Amahi (with a capital A)
• Secret: this is the 4-character you got the when you installed the IPSec VPN app in your HDA
• Proxy: leave it as off

Below you can see how the setup area looks in a few Apple iOS devices.

iPad

It should look something like this on the iPad 2, iOS 4.x

iPhone 3, iPod Touch

It should look something like this on the iPhone 3, iOS 4.x

Windows 7

Currently we only support one IPSec VPN client, a free client from Shrew Soft

• Download and install the Shrew Soft Client. Their Windows VPN Client download page may have more recent versions.
• Open client and click on + (Add) to add a configuration
• Enter YOURNICK.yourhda.com. Replace YOURNICK with your actual HDA nickname, so that your DynDNS works.

• Go into the Authentication tab
• Select Mutual PSK + XAuth
• Under the Local Identity tab, select Key Identifier, enter Amahi (this is called the Group Name and acts as an extra layer of protection)

• In the Credentials tab, the Pre Shared Key should be ready to take the VPN secret obtained in the VPN web page inside your HDA.
• The rest of things should work as default
• Save

• Finally click on connect or double click on the profile for your VPN
• Input your username and password for a user in your Amahi HDA

• If all goes well, you should be connected and you should see this welcome message: