Networking - Static IPs - Revision history

Bigfoot65 at 04:14, 7 September 2015

2015-09-07T04:14:11Z

2010-07-09T13:32:07Z

2010-07-09T12:55:27Z

2009-08-31T03:44:24Z

2008-09-19T13:08:45Z

2008-08-20T02:07:08Z

2008-07-27T01:55:58Z

2008-07-18T05:14:43Z

2008-07-18T05:14:32Z

2008-07-18T05:13:49Z

@@ Line 1: / Line 1: @@
-You can assign static IP address to machines in your network, however, most modern machines will ask for a name to DHCP and that will work all the time regarless of the IP it gets.
+You can assign fixed (static) IP address to machines in your network, however, most modern machines will ask for a name to DHCP and that will work all the time regardless of the IP it gets.
 However, if you need to set IP addresses, you can do it from the
-        Setup -->   Networking  -->  Static IPs
+        Setup -->   Networking  -->  Fixed IPs
 And follow the prompts after pressing in the New Static IP.

← Older revision		Revision as of 13:32, 9 July 2010
Line 14:		Line 14:

	The MAC address of the device (in the form 00:11:22:33:44:55)		The MAC address of the device (in the form 00:11:22:33:44:55)
		+
		+	Your client should remain set up as DHCP, but will be assigned this "Static" IP the next time it is rebooted or the DHCP lease is released/renewed.

← Older revision		Revision as of 12:55, 9 July 2010
Line 6:		Line 6:

	And follow the prompts after pressing in the New Static IP.		And follow the prompts after pressing in the New Static IP.
		+
		+	You will need to enter:
		+
		+	A NAME for your device, that will be added to the Domain e.g. Laser_printer.home.com
		+
		+	An IP address in the range of 1-99, e.g. 192.168.1.20
		+
		+	The MAC address of the device (in the form 00:11:22:33:44:55)

@@ Line 1: / Line 1: @@
-You can assign static IP address to machines in your network versus using the random DHCP served one (100-254).
+You can assign static IP address to machines in your network, however, most modern machines will ask for a name to DHCP and that will work all the time regarless of the IP it gets.
-* From your browser (Internet Explorer, FireFox, etc) enter [http://hda/hosts http://hda/hosts].  This is a rough interface at the moment, but it gets the job done.
-  [[image:Static.PNG]]
+However, if you need to set IP addresses, you can do it from the
-# '''Host:'''  system name (webcam, kitchenpc, pvr, etc)
-# '''Mac:'''  MAC address for the system (i.e. 00:0E:0C:60:8F:2A).  Ensure you remove the / before entering the MAC and that you use colons (:), not dashes (-). Note that your MAC address can be obtained by using '''ipconfig /all''' in Windows, or from your HDA with the '''arp''' command at the HDA prompt.
+       Setup -->   Networking  -->  Static IPs
-# '''Address:'''  Last number in the IP address (111.111.111.xxx) range (i.e. 32, 43, 110, etc).  It cannot be the same as the hda server.
-# Select '''Create''' to complete.
+And follow the prompts after pressing in the New Static IP.

@@ Line 6: / Line 6: @@
 # '''Address:'''  Last number in the IP address (111.111.111.xxx) range (i.e. 32, 43, 110, etc).  It cannot be the same as the hda server.
 # Select '''Create''' to complete.
 * Release and acquire a new lease for the machine with the new IP address.  In windows, '''ipconfig /release''' followed by '''ipconfig /renew'''.