ETH1

From Amahi Wiki
Revision as of 19:06, 21 May 2011 by Cpg (talk | contribs)
Jump to: navigation, search
Warning.png WARNING
This should only be attempted by advanced users. It may not work 100% of the time on all apps.


Amahi runs best with eth0, since it's the default option. Running with eth1 may not work for all apps, etc.

However, here is how to run an HDA with eth1

  • Edit /etc/hdactl.conf and set DEVICE=eth1
  • Change /etc/openvpn/openvpn-startup (line 5)

If you install an app like ushare:

  • Change /var/hda/apps/ushare/ushare.conf (line 13)

If you install darkstat:

  • Change amahi-darkstat.initscript

Note that any change to /usr/bin/hdactl will be removed each time the hdactl RPM package is updated (when Amahi is updated), which means you'll need to re-do the above edit each time Amahi is updated.

For advanced users, you can have more complex Network customizations.

You can also try changing the bindings from your devices to the network names (eth0, eth1, wlan0, ...).