Scanner Server

From Amahi Wiki
Revision as of 18:35, 1 September 2009 by Khelmar (talk | contribs)
Jump to: navigation, search

This page is about making Amahi run as a Scanner Server.

Due to the variety of scanners available in the market (standalone, as part of a printer or fax or multifunction systems), some may experience trouble with permissions.

Preventing permissions issues

The install process should create a script called install.sh in the web app directory (by default, /var/hda/web-apps/scanner). To run it, use the following commands after plugging in your scanner:

su -

(enter root password)

./install.sh

The basic steps the script takes are below.

Older instructions

We want to make the scanner RW for a scanner group, that Apache is a member of and has access to. To do this, start by making a new group:

   su -
   groupadd -r scanner

Add apache and root to the new group:

   usermod -a -G scanner apache
   usermod -a -G scanner root

Next, we need to tell the system to set the scanner permissions so it uses the new group.

To do that, we need to know how to identify the scanner. I'm assuming you have a USB scanner; if not, the process is similar, but I'm not sure how to identify the scanner correctly.

With the scanner plugged in, run the lsusb command. You'll get several lines like this:

   Bus 002 Device 003: ID 03f0:5d11 Hewlett-Packard Photosmart C5200 series

Look for the one that looks like it's for your scanner or printer (if the scanner is built in, as is the case above for the all-in-one printer+scanner from HP), and write down the two numbers next to ID (in this case 03f0 and 5d11). The left number is the vendor ID, and the right is the product ID. Another option is to look here: http://www.linux-usb.org/usb.ids for your manufacturer and product.

AS ROOT, create a file called 15-scanner.rules in the /etc/udev/rules.d/ directory that contains exactly one line:

 SUBSYSTEM=="usb", ATTR{idVendor}=="<left number from lsusb>", ATTR{idProduct}=="<right number from lsusb>", ACTION=="add",NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", GROUP="scanner",OPTIONS+="last_rule"

This tells the system "If this SPECIFIC USB device is plugged in, make it part of the scanner group with the default permissions (RW by owner and group), and stop processing rules.

Save the file, then:

  • restart the httpd service to pick up the group permissions, via Apps -> Servers or by hand as root with:
            service httpd restart
  • unplug and replug your scanner to pick up the settings

That should be it.

An alternate idea: a shell script at install, to set up a rule for you.

if [ $UID -ne 0 ]; then
  echo "Please, type root's password..."
  su -c "$0 $@"
  exit
fi
   groupadd -r scanner
   usermod -a -G scanner apache
   usermod -a -G scanner root
lsusb
echo "Please enter the vendor ID of your scanner (number to the left of the colon):"
read vend_ID
echo "Please enter the product ID of your scanner (number to the right of the colon):"
read product_ID
echo "SUBSYSTEM==\"usb\", ATTR{idVendor}==\""$vend_ID"\",ATTR{idProduct}==\""$product_ID'", ACTION="add",NAME="bus/usb/$env{BUSNUM}/$env\{DEVNUM\}", GROUP="scanner",OPTIONS+="last_rule"' > /etc/udev/rules.d/22_scanner.rules

echo "Rules created! Please unplug and replug your scanner to finish."


Basically, this makes sure the script is running as root (and becomes root if not), lists the currently attached USB devices, and asks for the vendor and product IDs. It then pastes those into a rule that will work.