'''NOTE:''' By default, the VPN will only route traffic destined for your home network via the VPN. General web traffic etc, will *not* be encrypted. To change this behaviour so that all network traffic from your client is routed via your VPN, edit /etc/racoon/racoon.conf and remove the lines beginning "split_network" and "split_dns". The restart racoon.  = Changing the Secret and/or the Group Name =

= Route All IPSEC VPN traffic through VPN (Amahi 6/Ubuntu) = After you install IPSEC VPN =and configure your router and iPhone correctly, you may find that Twitter and Facebook are still blocked by some networks. Also searching for "what is my ip" via Google or your favorite search engine will report back that you are still on the local network.

After The Amahi VPN is set to use a split VPN tunnel by default. If you install IPSEC VPN and configure your router and iPhone correctlywant to use blocked services while behind somebody's internet filters, you may find that twitter can use these steps to encrypt your traffic and facebook are still use blocked by some networks.Also google-ing "what is my ip" will report back that you are still on the local networkservices like Twitter and Facebook.

The Amahi VPN is set Below are the steps to use a split direct all traffic through the VPN tunnel by default. If you want to use blocked services while behind somebody's internet filtersPlease note this will divert all of your traffic through your HDA, but you can use these steps will not be able to encrypt access some of your traffic and use blocked services like twitter and facebooknetwork resources.

Below are the steps to direct all traffic through the VPN1. Please note: this will divert all of Open a terminal on your traffic through your hda, but you will not be able to access some of your network resourcesHDA or use SSH.<br />

1 Open a terminal on your hda or ssh in2.2 Go to /etc/racoon (that is spelled correctly BTW).{{Code| cd /etc/racoon}} 3 . Back-up the original racoon.conf in case things break.<br /> cp racoon.conf racoon.conf.orig 4 . As rootuser, open racoon.conf with your favorite editor, mine happens to be nano.{{Code| sudo nano racoon.conf}} 5 down arrow . Go to the line with "mode_cfg".{{Code| <pre>mode_cfg {

default_domain "Jamahi3amahi3.com";

}</pre>}}note <b>NOTE: I</b> Let'm going to s concentrate on the two lines that I were changed: "split_network" and "split_dns". 6 . Change split_network from "include" to "local_lan" and delete the 198.162.... range.{{Code| <pre>mode_cfg {

split_network local_lan 10.100.100.0/24; </pre> }} 7 I also changed . Also change "split_dns " to the name that I changed my home domain to...{{Code| <pre>mode_cfg {

split_dns "Jamahi3amahi3.com";</pre> }}8 . Save your work<br /> 9 . Restart the racoon server{{Code| sudo service racoon restart }}Or - open up your hda, click on settings>servers and restart the IPSEC server.

Or open up your HDA dashboard, click on settings->servers and restart the IPSEC server. Searching for "what is my ip" via Google or your favorite search engine should now report your home VPN. You should then be able to use Twitter and Facebook through your VPN. = Forwarding Route all traffic through the VPN (Fedora) =

1. At /etc/racoon/racoon.conf</br>Delete delete the 2 lines with split in mode_cfg :  split_network include 192.168.1.0/24, 10.8.1.0/24; split_dns "home.com";

<br>At /etc/racoon/amahi-up-down I change the lines 19 and 26 from eth0 to em1 because this is the network interface of my Hda. The changes are<br>from: iptables -t nat -A POSTROUTING -s ${INTERNAL_ADDR4}/32 -o eth0 -j MASQUERADE

iptables -t nat -A POSTROUTING -s ${INTERNAL_ADDR4}/32 -o em1 -j MASQUERADE

iptables -t nat -D POSTROUTING -s ${INTERNAL_ADDR4}/32 -o eth0 -j MASQUERADE<br>to iptables -t nat -D POSTROUTING -s ${INTERNAL_ADDR4}/32 -o em1 -j MASQUERADE

Finally I go to <nowiki>http://hda</nowiki>->Setup->Settings->Servers and restart the IPsec VPN Server.