Difference between revisions of "Plug notes"
From Amahi Wiki
| Line 16: | Line 16: | ||
Other: | Other: | ||
| − | * VPN does not work ( | + | * VPN does not work (had to turn it off in servers). This could be due to the kernel not having all that it needs for TUN/TAP?: |
Cannot allocate TUN/TAP dev dynamically | Cannot allocate TUN/TAP dev dynamically | ||
* Greyhole not working - hda-greyhole needed | * Greyhole not working - hda-greyhole needed | ||
Revision as of 00:24, 9 May 2010
- 2 stop bits to get the bootloader to recognize keyboard and stop autobooting
- speed: 115200 /dev/ttyUSB1
- root/fedoraarm default password
- rpms installed for development: rsync, git, vim-enhanced, sudo, make, rpm-build, tar, httpd-devel, boot-devel, gcc-c++
- passenger: need rubygems-1.3.5-4.fc12.noarch.rpm with macro changes
- rpms installed for amahi: httpd, ruby, samba,
- build hdactl, hda-platform, install (with --nodeps)
Missing deps in the installer:
- httpd, samba, cadaver, bind-utils
RPMs not available from the mirrors:
- hda-greyhole
- rubygem-gd2 - actually - is this one necessary?
Other:
- VPN does not work (had to turn it off in servers). This could be due to the kernel not having all that it needs for TUN/TAP?:
Cannot allocate TUN/TAP dev dynamically
- Greyhole not working - hda-greyhole needed
- crontab does not appear to be working
- had to add with noatime in / to prevent flash burnout
- should control monit - it keeps on pounding the flash with messages in /var/log/monit
- would like to add swap to flash based drives
- mt-daapd and amahi-transmission are dying
Getting it Going
Here are the steps to make it boot from USB
- Connect the JTAG module and connect the USB side to a terminal emulator
- Putty for windows (Serial)
- gtkterm for linux (use 2 stop bits!)
- Reset the device from the JTAG module
- At the terminal, press enter a couple of seconds after boot to prevent it booting to the flash
- There are some commands to make it permanently boot off USB:
