Difference between revisions of "RAID 1"

From Amahi Wiki
Jump to: navigation, search
(Created page with 'Installing Amahi with RAID 1 in 2HDD setup. See this other page for RAID5. So, to set the scene. I'm pretty much totally new to Linux and I'm just an enthusiastic amateur w…')
(No difference)

Revision as of 06:05, 11 May 2010

Installing Amahi with RAID 1 in 2HDD setup. See this other page for RAID5.

So, to set the scene. I'm pretty much totally new to Linux and I'm just an enthusiastic amateur when it comes to computers in general.

I'm setting up Amahi to use as a server for home and and home office for a new business I'm setting up. So it'll mainly store music and film files for home use and documents for work which will be accessed through a VPN. I may also use it to host a CRM system later.

I wanted to record this partly for myself, so when I realise I've gone wrong and have to do it all again I can see where, but also as my way of contributing. I've relied so much on others putting info up on fora, wikis etc. I hope this will be of use to someone else.

What I'm using:

  • Router with internet connection providing DHCP, connected to
  • Server (in my case an HP Proliant ML110 G5; Intel Xeon Dual Core 3065 @ 2.33 GHz; 3RG RAM)
  • 2 x 250GB Hard disk drives (in the server)
  • Keyboard and mouse attached to server
  • Fedora 10 DVD
  • Laptop to read instructions from (and type out these notes)
  • Registration details from the Amahi site.

Sites I'm using for info:

N.B. This installation is to install a completely fresh system with no dual-boot. All data on the drives will be wiped.

Installing Fedora 10

  1. Insert the Fedora disk into the server's DVD drive.
  2. Turn the server on.
  3. Select 'install or upgrade an existing system'.
  4. When asked, test the media (DVD) - just to make sure you won't get any surprises with it hanging on a dodgy disk.
  5. When the Screen comes up, click 'Next'.
  6. Chose your language.
  7. Chose your keyboard.
  8. Set a name for your computer and domain, or leave this as the default; click 'Next'.
  9. Select your time zone; click 'Next'.
  10. Set a root password (make a note of it); click 'Next'.
  11. Creating RAID partitions
  12. Select 'create custom layout'; click 'Next'.
  13. If your drives are already partitioned, delete all the various partitions, by selecting them and clicking 'delete'.
  14. Click 'RAID'.
  15. Select 'Create a software RAID partition.'; click 'OK'.
  16. Set the following options:
    1. File system type: Software RAID
    2. Allowable drives: tick the first (in my case 'sda')
    3. Size: 100 MB
    4. Additional size options: Fixed size
    5. Force to be primary partition: tick
    6. Click 'OK'.
  17. Repeat step 15, but in 15.2 tick the second drive (sdb)
  18. Click 'RAID'.
  19. Select 'Create a RAID device'; click 'OK'.
  20. Set the following options:
    1. Mount point: /boot
    2. File system type: ext3
    3. RAID device: md0
    4. RAID level: Level 1
    5. Raid members: tick both drives
    6. Click 'OK'.
  21. Select the 'Free space' on your first hard drive.
  22. Click 'New'.
  23. Set the following options:
    1. Mount point: [just leave this]
    2. File System Type: swap
    3. Allowable drives: tick the first
    4. Size: 2 x RAM (in my case 2 x 3GB = 6,000MB)
    5. Additional size options: Fixed size
    6. Click 'OK'
  24. Repeat step 22, but ticking the second drive in 22.3
  25. To set up each of the extra partitions on the drive repeat steps 15 to 19 (once for each new partition). These are the changes to make each time:
    1. Change sizes in 15.3 The sizes I have used are:
      1. /boot 100MB
      2. /usr 20000MB
      3. / 8000MB
      4. /var 5000MB
      5. /tmp 5000MB
      6. /home 10000MB
      7. /var/hda/files (what was left - this is where Amahi stores all your shared folders)
    2. Do not force to be primary partition in 15.5
    3. Use whatever RAID device is the default in 19.3
  26. Click 'Next'
  27. Click 'write changes to disk'. THIS WILL WIPE ALL YOUR DATA ON YOUR DISKS.
  28. Completing Fedora install
  29. When asked, tick 'Install boot loader on /dev/md0'; Click 'Next'.
  30. Deselect Office and Productivity, unless you want it (e.g. to simultaneously use your HDA as a desktop)
  31. Click on the "Add additional software repositories" button. If asked, enable your network interface.
  32. Add the Amahi repository with the following information:
    1. Repository name: amahi
    2. Repository URL: http://f10.amahi.org
  33. I've also added the additional repository shown to me:
    1. Installation Repo
  34. Proceed by clicking "Next" to the completion of the Install.
  35. Wait while all that downloads and installs.
  36. Take the Fedora DVD out of the drive.
  37. Click 'Reboot'.
  38. Follow the on screen instructions.
  39. Create a new (non-root) user, giving a password (write it down); Click 'Forward'.
  40. Set the date and time; Click 'Forward'.
  41. Select 'send profile'; Click 'Finish'.
  42. Log in using the username and password you created in step 37.
  43. Install Amahi
  44. Open a terminal (Applications > Sytem Tools >Terminal).
  45. Type the following commands (press [Enter] after each):
    1. su -
    2. [your root password]
    3. hda-install [the code Amahi gave you]
  46. If SELinux throws up any errors (shows what looks like a sheriff's star in the top bar, double-click it) read each one and follow the instructions.
  47. Reboot (may not be necessary - but I was having trouble so decided to reboot after each stage to figure out what the problem was).

  48. Make both HDDs bootable (so if one fails you have an exact copy - that's the point of RAID isn't it?)
  49. Log in.
  50. Open a terminal window.
  51. Type the following commands (press [Enter] after each):
    1. su -
    2. [your root password]
    3. grub
    4. device (hd0) /dev/sda
    5. root (hd0,0)
    6. setup (hd0)
    7. device (hd1) /dev/sdb
    8. root (hd1,0)
    9. setup (hd1)
  52. Close the terminal window.
  53. Check RAID is working
  54. You can test whether RAID is working by shutting down the server, disconnecting on of the drives and seeing whether it boots when you turn it back on. If it does, shut it down again, disconnect the other drive and reconnect the first one and try to boot from that drive. If it boots from both, everything is ok.
  55. Log back in to your system and check for and install any other updates (go to System > Administration > Update System then follow the instructions to install the updates you want).
  56. Once everything has updated, reboot the server.
  57. Once you've logged back in to Fedora, open another terminal.
  58. Become root, by typing:
    1. su -
    2. [enter your root password]
  59. You can now check your RAID drives by typing:
    1. mdadm --detail /dev/md0 [then add another /dev/md... for each extra RAID you set up - so for me I went from md0 to md5]

    Set up monitoring of RAID

  60. You can then set up monitoring so that it will email you if anything goes wrong by typing:
    1. mdadm --monitor --scan --mail=you@domain.com delay=3600 --daemonise /dev/md0 /dev/md1 /dev/md2 /dev/md3 /dev/md4 /dev/md5
  61. THIS STEP (56) HAS BEEN CAUSING MY COMPUTER TO HANG DURING BOOT, SO I HAVEN'T IMPLEMENTED IT IN THE END. You may choose to use it (hopefully someone with more understanding than me will see what I've got wrong and change this page to corect it). To ensure that this is running whenever you start the server apparently this should be put into /etc/rc.local. You can do this by entering:
    1. nano /etc/rc.local
    2. In the window that opens add the following line at the end: mdadm --monitor --scan --mail=you@domain.com delay=3600 --daemonise /dev/md0 /dev/md1 /dev/md2 /dev/md3 /dev/md4 /dev/md5
    3. Save and Exit nano
  62. Reboot
  63. Now you can go to http://hda to set up your Amahi server.


I hope this helps, but please feel free to correct anything I've got wrong. I've really been feeling my way here, so I can't guarantee that any of the above will work or work seamlessly, but I hope it will.