#REDIRECT [[Amahi_Plug_Edition]]
'''Note: Most of this information is duplicated elsewhere. It needs to be verified and removed as necessary.'''
See [[Amahi_Plug_Edition | Amahi_Plug_Edition]] for installation and supported devices.
= Misc Notes =
* restarting rpm db in chrooted environment:
{{Code|rm /var/lib/rpm/__db*
rpm --rebuilddb -vv}}
<!--* May need to add the following line to /etc/resolv.conf if you have DNS issues:
nameserver 8.8.8.8-->
<!-- OLD NOTES
* 2 stop bits to get the bootloader to recognize keyboard and stop autobooting
* speed: 115200 /dev/ttyUSB1
* rpms installed for amahi: httpd, ruby, samba,
* build hdactl, hda-platform, install (with --nodeps)
Missing deps in the installer:
* httpd, samba, cadaver, bind-utils
RPMs not available from the mirrors:
* hda-greyhole
* cadaver
* rubygem-gd2 - actually - is this one necessary?
* ruby-RMagick
* ssh into the plug
* yum -y install httpd
* Install the hda-release
** <small><code>rpm -Uvh <latest_rpm repo="amahi-f12" rpm="hda-release" arch="noarch" output="url" /></code></small>
* Install hdactl
** <small><code>rpm -Uvh --nodeps <latest_rpm repo="amahi-f12" rpm="hdactl" arch="armv5tel" output="url" /></code></small>
* Now install <code>hda-platform</code>
** <small><code>rpm -Uvh --nodeps <latest_rpm repo="amahi-f12" rpm="hda-platform" arch="noarch" output="url" /></code></small>
* Install dependencies:
** <small><code>yum -y install rubygems ruby-libs ruby-mysql</code></small>
* Start the Amahi installer.
** <small><code>service amahi-installer start</code></small>
Other:* VPN does And last but not work (had to turn it off in servers). This could be due to least, get the kernel not having all that installer going by accessing it needs for TUN/TAP?with a browser: Cannot allocate TUN <code><nowiki>http:/TAP dev dynamically* Greyhole not working - hda-greyhole needed* crontab does not appear to be working* had to add with noatime in / to prevent flash burnout* should control monit - it keeps on pounding the flash with messages in your_ip_address:2000</varnowiki></log/monit* would like to add swap to flash based drives* mt-daapd and amahi-transmission are dyingcode>
= Getting it Going =Here are the steps to make it boot from USB* Connect input the JTAG module install code and connect the USB side to a terminal emulator* Putty for windows (Serial)* gtkterm for linux (use 2 stop bitsinstall!)* Reset the device from the JTAG module* At the terminal, press enter a couple of seconds after boot to prevent NOTE: it booting may be better to the flash* There are some commands to make it permanently boot off USB:report bugs!-->