Changes

From Amahi Wiki
Jump to: navigation, search

Plug notes (view source)

Revision as of 11:27, 15 July 2011

260 bytes added ,  11:27, 15 July 2011
Redirected page to Amahi Plug Edition
#REDIRECT [[Amahi_Plug_Edition]]
 
 
'''Note: Most of this information is duplicated elsewhere. It needs to be verified and removed as necessary.'''
 
See [[Amahi_Plug_Edition | Amahi_Plug_Edition]] for installation and supported devices.
 
 
 
= Misc Notes =
 
* restarting rpm db in chrooted environment:
{{Code|rm /var/lib/rpm/__db*
rpm --rebuilddb -vv}}
 
<!--* May need to add the following line to /etc/resolv.conf if you have DNS issues:
nameserver 8.8.8.8-->
 
<!-- OLD NOTES
* 2 stop bits to get the bootloader to recognize keyboard and stop autobooting
* speed: 115200 /dev/ttyUSB1
* rpms installed for amahi: httpd, ruby, samba,
* build hdactl, hda-platform, install (with --nodeps)
 
 
Missing deps in the installer:
* httpd, samba, cadaver, bind-utils
RPMs not available from the mirrors:
* hda-greyhole
* cadaver
* rubygem-gd2 - actually - is this one necessary?
* ruby-RMagick
Other:
* VPN does not work (had to turn it off in servers). This could be due to the kernel not having all that it needs for TUN/TAP?:
Cannot allocate TUN/TAP dev dynamically
* Greyhole not working - hda-greyhole needed
* crontab does not appear to be working
* had to add with noatime in / to prevent flash burnout
* should control monit - it keeps on pounding the flash with messages in /var/log/monit
* would like to add swap to flash based drives
* mt-daapd and amahi-transmission are dying
= Getting it Going =
Here are the steps to make it boot from USB
* Connect the JTAG module and connect the USB side to a terminal emulator
* Putty for windows (Serial)
* gtkterm for linux (use 2 stop bits!)
* Reset the device from the JTAG module
* At the terminal, press enter a couple of seconds after boot to prevent it booting to the flash
* There are some commands to make it permanently boot off USB:
 
= Amahi Install =
* ssh into the plug
* yum -y install httpd
 * proceed to Install the [[Selfhda-release** <small><code>rpm -Uvh <latest_rpm repo="amahi-f12" rpm="hda-release" arch="noarch" output="url" /></code></small> * Install hdactl** <small><code>rpm -Uvh --nodeps <latest_rpm repo="amahi-f12" rpm="hdactl" arch="armv5tel" output="url" /></code></small> * Now install<code>hda-platform</code>** <small><code>rpm -Uvh -existing]] instructions-nodeps <latest_rpm repo="amahi-f12" rpm="hda-platform" arch="noarch" output="url" /></code></small> * Install dependencies:** <small><code>yum -y install rubygems ruby-libs ruby-mysql</code></small> * Start the Amahi installer.** <small><code>service amahi-installer start</code></small> * And last but not least, but use get the armv5tel hdactlinstaller going by accessing it with a browser: <code><nowiki>http://your_ip_address:2000</nowiki></code> * input the install codeand install!* NOTE: it may be better to * report bugs!-->
Mattwire
19

edits

Retrieved from "https://wiki.amahi.org/index.php/Special:MobileDiff/12625...42955"