ISCSI

This is going to be the howto on how to install a ISCSI server on F14 with Amahi 6

First of all the usual warnings

Disclaimer: does not cover misuse, boogars and other bodily excrements, accident, lightning, flood, tornado, tsunami, volcanic eruption, earthquake, hurricanes, or other acts of God, neglect, damage from improper use, incorrect line voltage, unauthorized use, unauthorized repair, improper installation, typos, broken antenna or marred cabinet, missing or altered serial numbers, electromagnetic radiation from nuclear blasts, sonic boom vibrations, customer adjustments that are not covered in this list, and incidents owing to an airplane crash, ship sinking or taking on water, motor vehicle crashing, dropping the item, falling rocks, leaky roof, broken glass, disk failure, accidental file deletions, mud slides, forest fire, hitting of a deer, milk coming out of your nose due to laughing while drinking, or projectiles, which can include, but are not limited to, arrows, bullet shots, BBs, shrapnel, lasers, napalm, torpedoes, emissions of X-rays, Alpha, Beta and Gamma rays, knives, stones, and touching in inappropriate places, etc.

This disclaimer may not be copied or reproduced in any form

without the expressed written consent of whoever I stole it from.

now that we have the legal stuff covered , let's get started

Installing the ISCSI server

Log into your amahi box via ssh and become root

NOTE: As i have experienced myself it is a good idea to check if your updates are all done correctly . do this by Typing

 yum update 

let amahi update whatever is necessary to avoid a kernel module error trying to start the ISCSI server.

then install kernel headers and gcc

 yum install kernel-headers kernel-devel gcc

now we going to download the install script i wrote

 wget http://dl.dropbox.com/u/57179706/iscsi/install.sh

then run sh ./install.sh

this should have now compiled and installed the ISCSI server on your Amahi box

Configuration and creation of an ISCSI disk image

the easiest way to get an iscsi target is to create an image file

we are doing this by typing :

  mkdir /var/hda/files/iscsi
  dd if=/dev/zero of=/var/hda/files/iscsi/disk.img bs=1M count=0 seek=2560000

you can name the disk.img whatever you want and the numbers behind seek is the size of the image disk which in our case is 250 gigs

now if we look in /var/hda/files/iscsi/ we will find a file called disk.img

Configuring the ISCSI server to serve your disk image

we have to edit the config file in /etc/iet/ietd.conf (use your favorite editor)

Leave everything as it is exept at the bottom we add

 Target iqn.2012-02.com.domain:disk.img

 Lun 0 Path=/var/hda/files/iscsi/disk.img,Type=fileio

save and exit your editor

start/restart your ISCSI server

 service iscsi-target restart

done

I will update this page later on how to hook a ISCSI drive using the win7 iscsi-initiator when i finally figured out why i have no toolbar while editing the wiki page