11
edits
Changes
From Amahi Wiki
fix netboot link
'''NOTE:''' PXE Knife has been superseded by Amahi [[Netboot]]. This is still in development.
===Legacy Notes===
*Get the latest tar from http://pxeknife.erebor.org/releases/
*migrate to /usr/share/hda-app-pba/tftp/
*untar the pxeknife ( tar -xvf pxeknife.tar.gz )
*run " yum install syslinux "
*run " cp -rf /usr/lib/syslinux/*.c32 /usr/share/hda-app-pba/tftp/ "
*now go to /usr/share/hda-app-pba/tftp/pxelinux.cfg/
*run "mv default default.old"
*pico default
*add this to the file
<pre>
DEFAULT menu.c32
PROMPT 0
TIMEOUT 100 #this is optional - will start the default after 10 seconds
MENU TITLE --== Main Menu ==--
#this allows you to exit the pxe stack and pass booting to the local system
LABEL bootlocal
MENU DEFAULT
MENU LABEL Local Boot
localboot 0
#load pxe knife
LABEL pxeknife
MENU LABEL PXE Knife --->
kernel menu.c32
append pxeknife/pxeknife.conf
LABEL PBA
MENU LABEL PBA --->
kernel vmlinuz
APPEND nfsdir=hda:/var/hda/apps/pba/client/isolang=us ramdisk_size=100000 nomce dma nosound apm=power-off nopcmcia nofirewire init=/etc/init nomce vga=normal initrd=miniroot.gz 2 BOOT_IMAGE=insert
</pre>
*Now you should be ready to do a netboot.
*Add PBA to boot options - still needs to be tested
*Installing OS though pxeknife - every operating system is different. After downloading the iso. You need to find the kernel(vmlinuz, linux, ...) and the intrid (.gz, .... ). Below we will document different OS. If you have installed an OS that is not mentioned please add it for others to be able to do it.
*[[Ubuntu-netboot]]
