Difference between revisions of "Networking - Static IPs"
From Amahi Wiki
| Line 3: | Line 3: | ||
[[image:Static.PNG]] | [[image:Static.PNG]] | ||
# '''''Host:''''' system name (webcam, kitchenpc, pvr, etc) | # '''''Host:''''' system name (webcam, kitchenpc, pvr, etc) | ||
| − | # '''''Mac:''''' MAC address for the system (i.e. 00:0E:0C:60:8F:2A). This can be obtained this by using '''ipconfig /all''' in Windows. Ensure you remove the / before entering the MAC and that you use colons (:), not dashes (-). Note that you can find out the MAC addresses in your network from your hda with the | + | # '''''Mac:''''' MAC address for the system (i.e. 00:0E:0C:60:8F:2A). This can be obtained this by using '''ipconfig /all''' in Windows. Ensure you remove the / before entering the MAC and that you use colons (:), not dashes (-). Note that you can find out the MAC addresses in your network from your hda with the "arp" command at the HDA prompt. |
| − | |||
| − | command at the HDA prompt. | ||
# '''''Address:''''' Last number in the IP address (111.111.111.xxx) range (i.e. 32, 43, 110, etc). It cannot be the same as the hda server. | # '''''Address:''''' Last number in the IP address (111.111.111.xxx) range (i.e. 32, 43, 110, etc). It cannot be the same as the hda server. | ||
# Select '''Create''' to complete. | # Select '''Create''' to complete. | ||
* As user ''root'' enter '''hdactl-hup'''. | * As user ''root'' enter '''hdactl-hup'''. | ||
* Release and acquire a new lease for the machine with the new IP address. In windows, '''ipconfig /release''' followed by '''ipconfig /renew'''. | * Release and acquire a new lease for the machine with the new IP address. In windows, '''ipconfig /release''' followed by '''ipconfig /renew'''. | ||
Revision as of 04:50, 18 July 2008
You can assign static IP address to machines in your network versus using the random DHCP served one (100-254).
- From your browser (Internet Explorer, FireFox, etc) enter http://hda/hosts. This is a rough interface at the moment, but it gets the job done.
- Host: system name (webcam, kitchenpc, pvr, etc)
- Mac: MAC address for the system (i.e. 00:0E:0C:60:8F:2A). This can be obtained this by using ipconfig /all in Windows. Ensure you remove the / before entering the MAC and that you use colons (:), not dashes (-). Note that you can find out the MAC addresses in your network from your hda with the "arp" command at the HDA prompt.
- Address: Last number in the IP address (111.111.111.xxx) range (i.e. 32, 43, 110, etc). It cannot be the same as the hda server.
- Select Create to complete.
- As user root enter hdactl-hup.
- Release and acquire a new lease for the machine with the new IP address. In windows, ipconfig /release followed by ipconfig /renew.
