Difference between revisions of "Binding Network Devices"

From Amahi Wiki
Jump to: navigation, search
Line 6: Line 6:
  
 
=Example=
 
=Example=
 
+
<small>
 
  SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:1d:60:b5:43:66", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
 
  SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:1d:60:b5:43:66", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
 
  SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="5c:d9:98:af:21:43", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="et1"
 
  SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="5c:d9:98:af:21:43", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="et1"
 +
</small>
  
 
This file maps the card with MAC 00:1d:60:b5:43:66 to eth0 and the card with 5c:d9:98:af:21:43 to eth1.
 
This file maps the card with MAC 00:1d:60:b5:43:66 to eth0 and the card with 5c:d9:98:af:21:43 to eth1.

Revision as of 20:36, 29 July 2012

You can manually force the assignment from a network card to what device comes up as (eth0, eth1 ...), by changing the udev rules. You can manually edit this file:

           /etc/udev/rules.d/70-persistent-net.rules

This file maps MAC address to device name.

Example

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:1d:60:b5:43:66", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="5c:d9:98:af:21:43", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="et1"

This file maps the card with MAC 00:1d:60:b5:43:66 to eth0 and the card with 5c:d9:98:af:21:43 to eth1.

If you want to reverse the assignements, switch eth0 and eth1 at the end of the entries. Or delete one of the entries.

These changes will only take effect after a reboot.

Please exercise care. Improperly modifying this file may render your system without network or even not boot properly.