Difference between revisions of "Transition to Amahi"

Revision as of 08:04, 14 January 2015

The most difficult part of transitioning to using your Amahi HDA. A typical symptom is that

http://hda

is not reachable and leads to some site on the internet (like amahi.net).

For best results, we recommend that you fully transition your network to using your Amahi server, including for DNS.

The simplest way to do this is to do these things in the following order

turn off all other DHCP servers in your network, typically in your router/gateway
restart the networking (or the whole device) in your client device. Turn off WiFi and turn it on if it has WiFi, or simply reboot

If you have any fixed IP devices in your network from your router settings, you can also set them in your HDA under Setup > Networking.

If you have further networking trouble, consult the Network Troubleshooting page.

Revision as of 09:02, 11 January 2015 (view source) Cpg (talk \| contribs) (Created page with "The most difficult part of transitioning to using your Amahi HDA. A typical symptom is that http://hda is not reachable and leads to some site on the internet (like amahi.net...")		Revision as of 08:04, 14 January 2015 (view source) Cpg (talk \| contribs) Newer edit →
Line 12:		Line 12:

	If you have any fixed IP devices in your network from your router settings, you can also set them in your HDA under Setup > Networking.		If you have any fixed IP devices in your network from your router settings, you can also set them in your HDA under Setup > Networking.
		+
		+	If you have further networking trouble, consult the [[Network Troubleshooting]] page.