Difference between revisions of "Ubuntu Installation Troubleshooting"
From Amahi Wiki
(Created page with "= Troubleshooting = Double check your network settings with '''<code>ifconfig</code>''' and '''<code>route -n</code>'''. These should be the settings that you use in the install...") |
|||
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | = | + | == Loss of Network Connectivity == |
− | |||
Double check your network settings with '''<code>ifconfig</code>''' and '''<code>route -n</code>'''. These should be the settings that you use in the installation. If these are not correct you can change the ip address by issuing the command | Double check your network settings with '''<code>ifconfig</code>''' and '''<code>route -n</code>'''. These should be the settings that you use in the installation. If these are not correct you can change the ip address by issuing the command | ||
− | + | sudo ifconfig eth0 192.168.1.14 netmask 255.255.255.0 up | |
assuming 192.168.1.14 is your IP address. The route can be changed with | assuming 192.168.1.14 is your IP address. The route can be changed with | ||
− | + | sudo route add default gw 192.168.1.1 | |
assuming 192.168.1.1 is the address of your router.<br> | assuming 192.168.1.1 is the address of your router.<br> | ||
This is especially important if you are doing a headless install | This is especially important if you are doing a headless install |
Latest revision as of 15:47, 29 August 2015
Loss of Network Connectivity
Double check your network settings with ifconfig
and route -n
. These should be the settings that you use in the installation. If these are not correct you can change the ip address by issuing the command
sudo ifconfig eth0 192.168.1.14 netmask 255.255.255.0 up
assuming 192.168.1.14 is your IP address. The route can be changed with
sudo route add default gw 192.168.1.1
assuming 192.168.1.1 is the address of your router.
This is especially important if you are doing a headless install