Latest revision as of 03:26, 21 July 2012

This page is no longer accurate. Please use guidance located here

Current state

We just started porting Amahi to Ubuntu. The support is highly experimental. There are a few important things to be fixed before you can run it with minimal tweaking. Please don't try it on a production server yet. We are using Ubuntu 12.04 LTS (Precise Pangolin) Desktop 32 bit for development. We strongly recommend you to use the same for experiments. You can download this version from here.

Requirements

You may want to have two different installations of Ubuntu.

A development platform, running Ubuntu 12.04 LTS Desktop 32 bit and/or 64 bit with the recommended development packages installed.
An Amahi sandbox, running Ubuntu 12.04 LTS Desktop 32 bit preferably under VirtualBox.

Please don't install the Amahi packages on the development platform as this might break your networking.

Setting up the development platform

Install Ubuntu 12.04 LTS Desktop 32 bit.
Install essential build toolchain.
1. sudo apt-get update
2. sudo apt-get install build-essential devscripts debhelper fakeroot lintian reprepro git-core
Read Ubuntu packaging guide to get an idea of other additional packages that you may want to install to create Ubuntu packages. I will list the packages to make your part easier at a later point.

Setting up the Amahi sandbox

Install Sun VirtualBox. # sudo aptitude install virtualbox-ose
Open VirtualBox and create a new guest platform for Ubuntu and install Ubuntu 12.04 LTS Desktop 32 bit.
Install VirtualBox guest additions in your Amahi sandbox. # sudo apt-get install virtualbox-ose-guest-utils (do this inside your virtual machine!)
Setup VirtualBox folder sharing between your development platform and Amahi sandbox.

Of course you can also download virtualbox from the virtualbox website and install the guest additions from the virtual CD with these additions (select install guest additions from the menu to mount the CD).

Amahi source code

On your development platform, download Amahi source code from our git repository. # git clone git://git.amahi.org/amahi.git

Follow these steps to build Ubuntu packages.

After downloading the source, navigate to the platform directory (/trunk/platform).
Navigate to the package you wish to build (hdactl or platform).
(if appropriate) run "dch -i" to edit the changelog if you have made changes
run "make deb" to compile the packages
run "debuild" to create binary packages or "debuild -S" to create source packages.

Architecture differences

No /etc/sysconfig folder. Instead, configuration is scattered all over the place.
Requires copying the functions library required by several shellscripts (but works fine)

Post install gotchas (asp's notes)

Known Bugs

Check out our project at our bugtracker

Considerations

~~Apache mod_passenger~~ This has been implemented in the installer since it is now in the default repositories.

This page is being edited actively and a lot of sections are missing currently

@@ Line 1: / Line 1: @@
-'''This page is being edited actively and a lot of sections are missing currently'''
+'''This page is no longer accurate.  Please use guidance located [http://docs.amahi.org here]'''
 =Current state=
-We just started porting Amahi to Ubuntu. The support is highly experimental. There are a few important things to be fixed before you can run it with minimal tweaking. Please don't try it on a production server yet. We are using Ubuntu 10.04 LTS (Lucid) Desktop 32 bit for development. We strongly recommend you to use the same for experiments. You can download this version from [http://www.ubuntu.com/getubuntu/download here].
+We just started porting Amahi to Ubuntu. The support is highly experimental. There are a few important things to be fixed before you can run it with minimal tweaking. Please don't try it on a production server yet. We are using Ubuntu 12.04 LTS (Precise Pangolin) Desktop 32 bit for development. We strongly recommend you to use the same for experiments. You can download this version from [http://www.ubuntu.com/getubuntu/download here].
 =Requirements=
 You may want to have two different installations of Ubuntu.
-* A development platform, running Ubuntu 10.04 LTS Desktop 32 bit and/or 64 bit with the recommended development packages installed.
+* A development platform, running Ubuntu 12.04 LTS Desktop 32 bit and/or 64 bit with the recommended development packages installed.
-* An Amahi sandbox, running Ubuntu 10.04 LTS Desktop 32 bit '''preferably''' under [http://www.virtualbox.org/ VirtualBox].
+* An Amahi sandbox, running Ubuntu 12.04 LTS Desktop 32 bit '''preferably''' under [http://www.virtualbox.org/ VirtualBox].
 Please don't install the Amahi packages on the development platform as this might break your networking.
 =Setting up the development platform=
-# Install Ubuntu 9.04 Desktop 32 bit.
+# Install Ubuntu 12.04 LTS Desktop 32 bit.
 # Install essential build toolchain.
 ## sudo apt-get update
-## sudo apt-get install build-essential
+## sudo apt-get install build-essential devscripts debhelper fakeroot lintian reprepro git-core
-## sudo apt-get install devscripts
-## sudo apt-get install debhelper
-## sudo apt-get install fakeroot
-## sudo apt-get install lintian
-# Install git. # sudo aptitude install git-core
 # Read [https://wiki.ubuntu.com/PackagingGuide/Complete Ubuntu packaging guide] to get an idea of other additional packages that you may want to install to create Ubuntu packages. I will list the packages to make your part easier at a later point.
 =Setting up the Amahi sandbox=
 # Install [http://www.virtualbox.org/ Sun VirtualBox]. # sudo aptitude install virtualbox-ose
-# Open VirtualBox and create a new guest platform for Ubuntu and install Ubuntu 10.04 LTS Desktop 32 bit.
+# Open VirtualBox and create a new guest platform for Ubuntu and install Ubuntu 12.04 LTS Desktop 32 bit.
 # Install VirtualBox guest additions in your Amahi sandbox. # sudo apt-get install virtualbox-ose-guest-utils  (do this inside your virtual machine!)
 # Setup VirtualBox folder sharing between your development platform and Amahi sandbox.
+Of course you can also download virtualbox from the virtualbox website and install the guest additions from the virtual CD with these additions (select install guest additions from the menu to mount the CD).
 =Amahi source code=
-On your development platform, download Amahi source code from our git repository. Follow these steps to build Ubuntu packages.
+On your development platform, download Amahi source code from our git repository. # git clone git://git.amahi.org/amahi.git
+*Follow these steps to build Ubuntu packages.
-Update Changelog
-. If you are repackaging for a newhttp://bugs.amahi.org/issues/show/487 version Run dch -v with the version number currently in the makefile. Where you run the command depends on if you are changing hdactl or hda-platform.
-         # cd deb/ubuntu/karmic/hdactl
-                OR
-         # cd deb/ubuntu/karmic/hda-platform
-         # dch -v <version number>
-   Add the changes that you made to the system. If you are just updating for a new version state so.
-   If you are not changing the version number run dch -a. Where you run the command depends on if you are changing hdactl or hda-platform.
-        # cd deb/ubuntu/karmic/hdactl
-                OR
-        # cd deb/ubuntu/karmic/hda-platform
-        # dch -a
-NOTE: If you are just building a .deb for your own testing you can just run make deb or continue to step 2.
-. To build hdactl package, change to 'platform/hdactl' directory and
-   run 'make deb'.
-       # cd platform/hdactl
-       # rm -rf hdactl-hup
-       # rm -rf platform/hdactl/release
-       # make deb
-   NOTE: The removing of hdactl-hup is only needed if it is present.
-   You will find the .deb file generated under platform/hdactl/release
-   directory.
-   NOTE: For ease of use use gdebi to install.
-. To build hda-platform package, change to 'platform/platform' directory and
-   run 'make deb'.
-       # cd platform/platform
-       # make deb
-   You will find the .deb file generated under platform/platform/release
+# After downloading the source, navigate to the platform directory (/trunk/platform).
-   directory.
+# Navigate to the package you wish to build (hdactl or platform).
+# (if appropriate) run "dch -i" to edit the changelog if you have made changes
+# run "make deb" to compile the packages
+# run "debuild" to create binary packages or "debuild -S" to create source packages.
 =Architecture differences=
@@ Line 85: / Line 42: @@
 = Known Bugs =
-*Debian control script for platform may be missing some dependencies. [http://bugs.amahi.org/issues/show/487 bug 487]
+Check out our project at [http://bugs.amahi.org/projects/show/ubuntu our bugtracker]
-*Passenger does not install see Considerations [http://bugs.amahi.org/issues/show/483 bug 483]
-*<s>HDACTL init scripts do not work [http://bugs.amahi.org/issues/show/484 bug 484]</s> Some do work under Fedora formatting (interesting!). amahi-installer script needs work to run.
 =Considerations=
 *<s>Apache mod_passenger</s> This has been implemented in the installer since it is now in the default repositories.

Amahi Wiki

Links

Personal tools

Navigation

Tools

Difference between revisions of "UbuntuPorting"