Difference between revisions of "UPS setup"
From Amahi Wiki
| (18 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | {{NeedsUpdate}} | |
| − | |||
| − | + | == Powering Amahi (Fedora 12/14) with APC Back-UPS and [http://www.networkupstools.org/index.html Network UPS Tools (NUT)] == | |
| − | + | The software APC Back-UPS comes with does not work in Linux. Instead, you need to use NUT or apcupsd. Google will turn up evidence that both work, but NUT seems to be the preferred one. | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | The original instructions that this guidance is based on came from [http://www.mscs.dal.ca/~selinger/ups/backups.html here] and [http://billauer.co.il/blog/2010/01/fedora-mustek-powermust-600-ups-nut-howto/ here]. The former, by Peter Selinger, are closest to this case, but a lot of the work he had to do is now done for you out of the box. The latter are for a different UPS, but are also fresher. | |
| + | |||
| + | |||
| + | '''NOTE:''' This will be a future Amahi Web Application. To use the web monitoring capability, see [http://www.amahi.org/apps/ups-monitor UPS Monitor]. | ||
| + | |||
| + | |||
| + | First, do this as [http://wiki.amahi.org/index.php/Open_Terminal_as_root root user]: | ||
| + | |||
| + | yum -y install nut nut-client | ||
| + | |||
| + | Next, you will need to configure four files in /etc/ups: ups.conf, upsd.users, hosts.conf, and upsmon.conf. They will look almost identical to Selinger's (password1 and password2 can be changed to anything): | ||
| + | |||
| + | vi /etc/ups/ups.conf | ||
| + | |||
| + | <pre> | ||
[apc] | [apc] | ||
driver = usbhid-ups | driver = usbhid-ups | ||
port = auto | port = auto | ||
| − | desc = "APC Back-UPS | + | desc = "APC Back-UPS" |
| − | + | </pre> | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | vi /etc/ups/upsd.users | ||
| − | + | <pre> | |
[admin] | [admin] | ||
password = password1 | password = password1 | ||
| Line 35: | Line 37: | ||
password = password2 | password = password2 | ||
upsmon master | upsmon master | ||
| − | + | </pre> | |
| + | |||
| + | vi /etc/ups/hosts.conf | ||
| + | <pre> | ||
| + | MONITOR apc@localhost "UPS on HDA" | ||
| + | </pre> | ||
| − | + | vi /etc/ups/upsmon.conf | |
| − | vi / | ||
| − | |||
| − | + | <pre> | |
MONITOR apc@localhost 1 monuser password2 master | MONITOR apc@localhost 1 monuser password2 master | ||
MINSUPPLIES 1 | MINSUPPLIES 1 | ||
| Line 54: | Line 59: | ||
NOCOMMWARNTIME 300 | NOCOMMWARNTIME 300 | ||
FINALDELAY 5 | FINALDELAY 5 | ||
| − | + | </pre> | |
| + | |||
The next step is to start the UPS service: | The next step is to start the UPS service: | ||
| − | + | ||
| − | upsdrvctl start | + | upsdrvctl start |
| − | service ups stop | + | service ups stop |
| − | service ups start | + | service ups start |
| − | |||
At this point, you should see something like this in your terminal: | At this point, you should see something like this in your terminal: | ||
| Line 70: | Line 75: | ||
If you do not, it may be because upsdrvctl refuses to cooperate at first. A reboot will fix that problem. The final step is to make sure that the UPS services start when the server does. For that, the /etc/rc.local file must be edited as follows: | If you do not, it may be because upsdrvctl refuses to cooperate at first. A reboot will fix that problem. The final step is to make sure that the UPS services start when the server does. For that, the /etc/rc.local file must be edited as follows: | ||
| − | + | vi /etc/rc.local | |
| − | vi /etc/rc.local | ||
| − | |||
| − | + | <pre> | |
echo "Starting UPS driver, daemon, and monitor." | echo "Starting UPS driver, daemon, and monitor." | ||
/sbin/upsdrvctl start | /sbin/upsdrvctl start | ||
/usr/sbin/upsd | /usr/sbin/upsd | ||
/usr/sbin/upsmon | /usr/sbin/upsmon | ||
| − | + | </pre> | |
Latest revision as of 03:46, 23 June 2020
|
Update Needed |
|---|---|
| The contents of this page have become outdated or irrelevant. Please consider updating it. |
Powering Amahi (Fedora 12/14) with APC Back-UPS and Network UPS Tools (NUT)
The software APC Back-UPS comes with does not work in Linux. Instead, you need to use NUT or apcupsd. Google will turn up evidence that both work, but NUT seems to be the preferred one.
The original instructions that this guidance is based on came from here and here. The former, by Peter Selinger, are closest to this case, but a lot of the work he had to do is now done for you out of the box. The latter are for a different UPS, but are also fresher.
NOTE: This will be a future Amahi Web Application. To use the web monitoring capability, see UPS Monitor.
First, do this as root user:
yum -y install nut nut-client
Next, you will need to configure four files in /etc/ups: ups.conf, upsd.users, hosts.conf, and upsmon.conf. They will look almost identical to Selinger's (password1 and password2 can be changed to anything):
vi /etc/ups/ups.conf
[apc]
driver = usbhid-ups
port = auto
desc = "APC Back-UPS"
vi /etc/ups/upsd.users
[admin]
password = password1
actions = SET
instcmds = ALL
[monuser]
password = password2
upsmon master
vi /etc/ups/hosts.conf
MONITOR apc@localhost "UPS on HDA"
vi /etc/ups/upsmon.conf
MONITOR apc@localhost 1 monuser password2 master MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG /etc/killpower RBWARNTIME 43200 NOCOMMWARNTIME 300 FINALDELAY 5
The next step is to start the UPS service:
upsdrvctl start service ups stop service ups start
At this point, you should see something like this in your terminal:
Starting UPS driver controller: [ OK ] Starting upsd: [ OK ] Starting UPS monitor (master): [ OK ]
If you do not, it may be because upsdrvctl refuses to cooperate at first. A reboot will fix that problem. The final step is to make sure that the UPS services start when the server does. For that, the /etc/rc.local file must be edited as follows:
vi /etc/rc.local
echo "Starting UPS driver, daemon, and monitor." /sbin/upsdrvctl start /usr/sbin/upsd /usr/sbin/upsmon
