Difference between revisions of "Build Machine for Amahi Express"

Latest revision as of 17:17, 9 January 2021

	Update Needed
	The contents of this page have become outdated or irrelevant. Please consider updating it.

This article contains specifications, construction steps, and implementation information for a "build machine" for the "Amahi Express Installation Disc". The intent of the machine is to aid in the development and building of new Amahi Express Installation disc images.

Since this article is a "work in progress", information in this article will be fluid for sometime, your patience will be appreciated. The author has never been down this path before.
Any advice or suggestions you may have please post to the Amahi Wiki "Express Disc" Forum.
The "Category" link, "Amahi Express Collection", at the bottom of this page provides links to other reference information relating to the "Amahi Express" subject area.
There are two known bugs posted on the Red Hat Bug Tracker that have a major effect on building a new Amahi Express Install Disc. Amahi members are currently attempting to find "workaround(s) that are being researched, prototyped, and tested.

Recommended Configuration

Latest full version of the Fedora ( this article will reference Fedora 18 32-bit) DVD.
As modern of a computer as possible ( machine for this article used: Intel Core 2 Duo @ 3.0 GHz, 4GB RAM, 160 GB Hard Disk ).
External storage facility ( i.e. external USB drive (1 TB?), Amahi share, Amahi ownCloud directory) with storage greater that the size of the build machine.
Backup software ( author used CloneZilla Livd CD with 1TB external drive) to store last working build machine image.
Lots of patience, a meticulous nature, know how to consult "Dr. Google" (a lot).

Fedora Installation

When installing Fedora it will be assumed that a "Desktop installation" path will be performed. Following are recommendations to be considered during the installation process.

During the installation select the GNOME GUI environment, at some point it will be required in the disc build process.
Highly recommend installing some GNOME extensions (GNOME Extensions) in order to provide a "classic windowing" environment.
The Fedora "Anaconda Installer" has changed completely since Fedora 14. A "Hub and "Spoke" node model is used for it now instead of a "wizard-like" install. Please make sure all nodes (i.e. network config.) are properly configured before proceeding with the installation.
Here is a disk partitioning plan to consider:

 /boot partition: "standard partition"(no LVM), ext3 format, size 250 MB ( Fedora recommendation).
  swap partition: "standard swap (no LVM)", swap format, size 2 times existing system RAM ( i.e. 2 x 4GB = 8GB ).
 /(root partition): LVM partition, ext4 format, size set to the remaining space for the hard drive(s).

Ensure that Fedora updates are done after the DVD installation.
Create "mount points" for use later.

|mkdir -p /media/optdrive
mkdir -p /media/usbdrive
mkdir -p /media/usbstick

Install the following packages.

yum -y install system-config-kickstarts # graphical interface for making kickstart files
yum -y install pungi # tool to create anaconda based installation trees/isos
yum -y install createrepo # tool to refesh repo databases

Optionally install the following packages.

yum -y install fedora-kickstarts # kickstarts used to compose the official Fedora Spins
                                 # sample kickstarts stored at /usr/share/spin-kickstarts
yum -y install custom-kickstarts # kickstart files for Custom Spins
                                 # sample kickstarts stored at /usr/share/spin-kickstarts/custom

Local Fedora Repositories

To reduce the amount of software packages that might have to be downloaded during a disc build process, local Fedora "base" and "updates" repositories should be used. These local repositories (repos) have an added advantage, the build machine can receive its' software updates.

The repos in this example will be stored in the "/opt" directory. What is this directory normally used for? I am so glad you asked.

According the the "Filesystem Hierarchy Standard" (FHS) definition:

"The root directory for Software Collections is normally located in the "/opt/ directory" to avoid possible
 conflicts between Software Collections and the base system installation."

 It is recommended to have the directory hierarchy conform to the following layout: 

  /opt/provider/application-version/

  where: - "provider" is the provider (vendor) name registered with the Linux Foundation.
         - "application-version" indicates the software collection version. This can be done via one name
           or an ordered organization of subdirectories.

Construct the Repositories

Start a "terminal session" and switch to the "root" user.
Create local repository directory structures.

mkdir -p /opt/fedora/f18/i386/base
mkdir -p /opt/fedora/f18/i386/updates

Mount the Fedora DVD.

mount -o loop /dev/sr0 /media/optdrive

Copy rpm packages to the local "base" repo directory structure.

{

cp -av /media/optdrive/Packages/* /opt/fedora/f18/i386/base

Copy the main "comps xml" file to the local "base" repo directory structure.

cp /media/optdrive/repodata/*comps*.xml /opt/fedora/f18/i386/base/comps.xml

The production Anaconda Installer for Fedora 18 has a bug that will not allow discs to be built. A "test" version is available that allows discs to be built.
Go to the Fedora 18 URL "http://mirrors.kernel.org/fedora/updates/testing/18/i386/" and download the following Packages:

anaconda-18.37.12-1.fc18.i686.rpm
anaconda-dracut-18.37.12-1.fc18.noarch.rpm
anaconda-widgets-18.37.12-1.fc18.i686.rpm

Go to the "base", Packages, "a" directory and remove the following production Anaconda Installer packages:

anaconda-18.37.11-1.fc18.i686.rpm
anaconda-dracut-18.37.11-1.fc18.noarch.rpm
anaconda-widgets-18.37.11-1.fc18.i686.rpm

Copy the downloaded "testing" Anaconda "version 12" packages to the "base", Packages, "a" directory.
Go to the local "base" repo and generate the "base" repo files.

cd /opt/fedora/f18/i386/base # go to the base package directory
createrepo . # refresh the "base" repo database
createrepo -g comps.xml . # refresh the comps.xml for group changes

Please notice the "dot" after createrepo, it's important.

Populate the "updates" repo.

 /bin/rsync -auvrt --delete --exclude=debug/ --exclude=drpms/ rsync://mirrors.kernel.org/fedora/updates/18/i386/
  /opt/fedora/f18/i386/updates

Please note this will take several hours to complete. Do it at night and check the next day.

Go to "updates" repo and generate the "updates" repo files.

cd /opt/fedora/f18/i386/updates
createrepo .

Create the "yum" Repository Files

Start a terminal sessions and switch to the root user.
Go to the /etc yum configuration directory.

cd /etc/yum.repos.d

Using a text editor create the "f18-base-local.repo" file and insert the following text, and then save the file.

[f18-base-local]
name=Fedora 18 local base repository
baseurl=file:///opt/fedora/f18/i386/base
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-18-primary
enabled=1

Using a text editor create the "f18-updates-local.repo" file and insert the following text, and then save the file.

[f18-updates-local]
name=Fedora 18 local updates repository
baseurl=file:///opt/fedora/f18/i386/updates
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-18-primary
enabled=0

PLEASE NOTE: The updates repository is disabled due to a Fedora 18 bugs (2 known bugs on Red Hat Bug Tracker) in the Anaconda Installer.

Disable all of the existing default repositories by editing each ".repo" file and setting "enabled=0" (from 1).

Test the Repositories

Start a terminal sessions and switch to the root user.
Enter the following commands.

yum clean all
yum repolist

Something like this with other stuff will be displayed.

repo id
f18-base-local
f18-updates-local

Refreshing a Repository

Now the updates repo will need to be updated on a regular basis. This can be done manually or a script file that is run on a nightly basis with the following commands.

# rsync to download new rpms

/bin/rsync -auv --delete --exclude=debug/ --exclude=drpms/ rsync://mirrors.kernel.org/fedora/updates/18/i386/
 /opt/fedora/f18/i386/updates

# go to the updates directory and rebuild the repo database

cd /opt/fedora/f18/i386/updates
createrepo .

Fringe Benefit

The "build" machine's Fedora 18 can be updated from the local repo by "yum -y --enablerepo=f18-updates-local update". Cool yes?

@@ Line 1: / Line 1: @@
-{{WorkInProgress}}
+{{NeedsUpdate}}
+This article contains specifications, construction steps, and implementation information for a "build machine" for the "Amahi Express Installation Disc". The intent of the machine is to aid in the development and building of new Amahi Express Installation disc images.
+__TOC__
+<br>
 '''Please Note:'''
 *Since this article is a "work in progress", information in this article will be fluid for sometime, your patience will be appreciated. The author has never been down this path before.
 * Any advice or suggestions you may have please post to the '''[https://forums.amahi.org/viewforum.php?f=44 Amahi Wiki "Express Disc" Forum]'''.
 * The "Category" link, "Amahi Express Collection", at the bottom of this page provides links to other reference information relating to the "Amahi Express" subject area.
-----
+* There are two known bugs posted on the Red Hat Bug Tracker that have a major effect on building a new Amahi Express Install Disc. Amahi members are currently attempting to find "workaround(s) that are being researched, prototyped, and tested.
-This article contains specifications, construction steps, and implementation information for a "build machine" for the "Amahi Express Installation Disc". The intent of the machine is to aid in the development and building of new Amahi Express Installation disc images.
-__TOC__
 === Recommended Configuration ===
-* Latest full version of the Fedora ( this article will reference Fedora 18 ) DVD.
+* Latest full version of the Fedora ( this article will reference Fedora 18 32-bit) DVD.
 * As modern of a computer as possible ( machine for this article used: Intel Core 2 Duo @ 3.0 GHz, 4GB RAM, 160 GB Hard Disk ).
 * External storage facility ( i.e. external USB drive (1 TB?), Amahi share, Amahi ownCloud directory) with storage greater that the size of the build machine.
-* Backup software ( author used CloneZilla Livd CD with 1TB external drive) to store last good build machine image.
+* Backup software ( author used CloneZilla Livd CD with 1TB external drive) to store last working build machine image.
 * Lots of patience, a meticulous nature, know how to consult "Dr. Google" (a lot).
@@ Line 26: / Line 29: @@
    '''/(root partition):''' LVM partition, ext4 format, size set to the remaining space for the hard drive(s).
 * Ensure that Fedora updates are done after the DVD installation.
+* Create "mount points" for use later.
+<blockquote><pre>|mkdir -p /media/optdrive
+mkdir -p /media/usbdrive
+mkdir -p /media/usbstick</pre></blockquote>
+* Install the following packages.
+<blockquote><pre>yum -y install system-config-kickstarts # graphical interface for making kickstart files
+yum -y install pungi # tool to create anaconda based installation trees/isos
+yum -y install createrepo # tool to refesh repo databases</pre></blockquote>
+* Optionally install the following packages.
+<blockquote><pre>yum -y install fedora-kickstarts # kickstarts used to compose the official Fedora Spins
+                                 # sample kickstarts stored at /usr/share/spin-kickstarts
+yum -y install custom-kickstarts # kickstart files for Custom Spins
+                                 # sample kickstarts stored at /usr/share/spin-kickstarts/custom</pre></blockquote>
 === Local Fedora Repositories ===
-In order to reduce the amount of software packages that might have to be downloaded during a disc build process, local Fedora "base" and "updates" repositories should be used. These local repositories (repos) have an added advantage as the build machine can receive its' software updates ( i.e. yum -y update ) from them.
+To reduce the amount of software packages that might have to be downloaded during a disc build process, local Fedora "base" and "updates" repositories should be used. These local repositories (repos) have an added advantage, the build machine can receive its' software updates.
 The repos in this example will be stored in the "/opt" directory. What is this directory normally used for? I am so glad you asked.
@@ Line 38: / Line 54: @@
   '' conflicts between Software Collections and the base system installation."''
-   It is recommended to have the file system hierarchy conform to the following layout:
+   It is recommended to have the directory hierarchy conform to the following layout:
     /opt/'''provider'''/'''application-version'''/
     '''where:''' - "provider" is the provider (vendor) name registered with the Linux Foundation.
-           - application-version indicates the software collection version. This can be done via one name
+           - "application-version" indicates the software collection version. This can be done via one name
              or an ordered organization of subdirectories.
 ==== Construct the Repositories ====
+* Start a "terminal session" and switch to the "root" user.
+* Create local repository directory structures.
+<blockquote><pre>mkdir -p /opt/fedora/f18/i386/base
+mkdir -p /opt/fedora/f18/i386/updates</pre></blockquote>
+* Mount the Fedora DVD.
+<blockquote><pre>mount -o loop /dev/sr0 /media/optdrive</pre></blockquote>
+* Copy rpm packages to the local "base" repo directory structure.
+<blockquote>{<pre>cp -av /media/optdrive/Packages/* /opt/fedora/f18/i386/base</pre></blockquote>
+* Copy the main "comps xml" file to the local "base" repo directory structure.
+<blockquote><pre>cp /media/optdrive/repodata/*comps*.xml /opt/fedora/f18/i386/base/comps.xml</pre></blockquote>
+* The production Anaconda Installer for Fedora 18 has a bug that will not allow discs to be built. A "test" version is available that allows discs to be built.
+* Go to the Fedora 18 URL "<nowiki>http://mirrors.kernel.org/fedora/updates/testing/18/i386/</nowiki>" and download the following Packages:
+<blockquote><pre>anaconda-18.37.12-1.fc18.i686.rpm
+anaconda-dracut-18.37.12-1.fc18.noarch.rpm
+anaconda-widgets-18.37.12-1.fc18.i686.rpm</pre></blockquote>
+* Go to the "base", Packages, "a" directory and remove the following production Anaconda Installer packages:
+<blockquote><pre>anaconda-18.37.11-1.fc18.i686.rpm
+anaconda-dracut-18.37.11-1.fc18.noarch.rpm
+anaconda-widgets-18.37.11-1.fc18.i686.rpm</pre></blockquote>
+* Copy the downloaded "testing" Anaconda "version 12" packages to the "base", Packages, "a" directory.
+* Go to the local "base" repo and generate the "base" repo files.
+<blockquote><pre>cd /opt/fedora/f18/i386/base # go to the base package directory
+createrepo . # refresh the "base" repo database
+createrepo -g comps.xml . # refresh the comps.xml for group changes</pre></blockquote>
+:Please notice the "dot" after createrepo, it's important.
+* Populate the "updates" repo.
+  /bin/rsync -auvrt --delete --exclude=debug/ --exclude=drpms/ rsync://mirrors.kernel.org/fedora/updates/18/i386/
+   /opt/fedora/f18/i386/updates
+:Please note this will take several hours to complete. Do it at night and check the next day.
+* Go to "updates" repo and generate the "updates" repo files.
+<blockquote><pre>cd /opt/fedora/f18/i386/updates
+createrepo .</pre></blockquote>
+==== Create the "yum" Repository Files ====
+* Start a terminal sessions and switch to the root user.
+* Go to the /etc yum configuration directory.
+<blockquote><pre>cd /etc/yum.repos.d</pre></blockquote>
+* Using a text editor create the "f18-base-local.repo" file and insert the following text, and then save the file.
+<blockquote>
+<pre>[f18-base-local]
+name=Fedora 18 local base repository
+baseurl=file:///opt/fedora/f18/i386/base
+gpgcheck=1
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-18-primary
+enabled=1</pre></blockquote>
+* Using a text editor create the "f18-updates-local.repo" file and insert the following text, and then save the file.
+<blockquote>
+<pre>[f18-updates-local]
+name=Fedora 18 local updates repository
+baseurl=file:///opt/fedora/f18/i386/updates
+gpgcheck=1
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-18-primary
+enabled=0</pre></blockquote>
+'''PLEASE NOTE:''' The updates repository is disabled due to a Fedora 18 bugs (2 known bugs on Red Hat Bug Tracker) in the Anaconda Installer.
+* Disable all of the existing default repositories by editing each ".repo" file and setting "enabled=0" (from 1).
 ==== Test the Repositories ====
+* Start a terminal sessions and switch to the root user.
+* Enter the following commands.
+<blockquote><pre>yum clean all
+yum repolist</pre></blockquote>
+* Something like this with other stuff will be displayed.
+<blockquote>
+<pre>repo id
+f18-base-local
+f18-updates-local</pre></blockquote>
-==== Refreshing the Repositories ====
+==== Refreshing a Repository ====
+* Now the updates repo will need to be updated on a regular basis. This can be done manually or a script file that is run on a nightly basis with the following commands.
+ # rsync to download new rpms
+ /bin/rsync -auv --delete --exclude=debug/ --exclude=drpms/ rsync://mirrors.kernel.org/fedora/updates/18/i386/
+  /opt/fedora/f18/i386/updates
+ # go to the updates directory and rebuild the repo database
+ cd /opt/fedora/f18/i386/updates
+ createrepo .
+==== Fringe Benefit ====
+* The "build" machine's Fedora 18 can be updated from the local repo by "yum -y --enablerepo=f18-updates-local update". Cool yes?
 <br>
 ----
 <!--Category References follow-->
 [[Category:Amahi Express Collection]]

Amahi Wiki

Links

Personal tools

Navigation

Tools