Amahi 7 full DVD

From Amahi Wiki
Revision as of 18:05, 18 August 2013 by Sgtfoo (talk | contribs)
Jump to: navigation, search

Steps for installing Amahi 7 from the full DVD:

  • Download the Fedora 19 DVD (the full DVD, netinstall may work, LiveCD may work, but only minimal is supported) for your architecture (32 bits or 64 bits, these apply to both)
  • Install Fedora 19 minimal:
    • boot, choose Install Fedora, choose language; then in software selection choose "minimal install";
    • this is not the default and is at the bottom of the list. Don't forget to remove the DVD after installing and before rebooting.
  • Do the selection of the hard drive partitioning that you need
  • Do not change the hostname (it may create issues)
  • Click on ``Begin Installation`` and the installer will proceed
  • Create an admin user. Make sure it's an admin user. No need to create a root password.
  • After a minimal install one needs to login as root first (in a text console)
  • Login with the admin user and become root for the rest of the installation
 sudo su -
  • Install the Amahi repo by hand with:
  rpm -Uvh http://f19.amahi.org/noarch/hda-release-6.9.0-1.noarch.rpm
  • Get the mariadb base packages (this is to avoid dependency conflicts)
  yum -y install mariadb-libs mariadb-server
  • If mariadb gives conflicts with mysql, uninstall all mysql packages first (and then try the line above):
  yum -y erase 'mysql*'
  • Try installing both hda-ctl and hda-platform. This should install a lot of dependencies with them
   yum -y install hda-ctl hda-platform
  • If that works, ```and only if that works```, so the Amahi install (also as root; replace YOUR-INSTALL-CODE with the code you set up in Amahi.org):
  hda-install YOUR-INSTALL-CODE
  • If that fails, check the Express CD troubleshooting page. For help, please fpaste the log (you may have to yum -y install fpaste). The log should be in
 /root/hda-install-*.log
  • If all goes well, it should tell you to reboot
  • It will boot with the static IP you preconfigured in the Amahi control panel
  • It's strongly recommended that you turn off the previous DHCP server and let Amahi handle DHCP so that DNS falls into place
  • Reboot all the clients to get them to use your Amahi server
  • Your Amahi dashboard should be at http://hda/
  • The first time it will initialize and will ask you to login to create a dashboard password for the admin user you created



Go back to Amahi 7 Installation