4,146
edits
Changes
From Amahi Wiki
no edit summary
== Post Install Action ==
If all seems to work, you can now disable your old DHCP server, and let your plug computer act as your new DHCP server.<br/> You'll need to [[RenewIP|release and then renew the IP address]] of your client computers, once your old DHCP server is disabled.<br/>
You'll then be able to access the Amahi dashboard at http://hda, and your installed apps using http://app_name
If you created a swap partition while partitioning your storage device, you might need to tell Amahi to use that partition for swap space. You'll need to change '''/dev/sda2''' for the real path to your swap partition. SSH into your Amahi server, and execute the following:
You will also need to edit the /etc/fstab file to use that new partition at startup
Check that everything is now working with
The total on the swap line should not be 0 if all worked out. Otherwise make sure the fstab has the right device for swapping.
Note: On the SheevaPlug, the onboard NAND flash is called /dev/mtdblock2. You might want to use it as a swap partition, as it would be faster than your SD card or USB drive.
