Trusted, Bureaucrats, Administrators
12,424
edits
Changes
From Amahi Wiki
→Amahi Install
* Configure a profile for the system in http://www.amahi.org. Pay attention to the IP of the HDA you configure. Let's call it PLUG_FIXED_IP.
* Ensure you do the USB Flash Drive Prep now.* Boot the system with the latest rootfs (amahi-marvell-0.2.tar.bz2). You can use the create-clean-f12-disk.sh script to put that file system
* Until we optimize things, it will take 4 or 5 minutes to boot the first time.
* The first time it boots, it will try to use DHCP. In my case, I configured a static IP so that when it boots with DHCP I know what IP it has. This may be different than the static you configured above.
With about 1/8th of the rpms on a typical x86 install, you will experience a lot of failures with apps (VPN does not work, apps will be missing deps, etc. etc.).
This script is very dangerous (it can destroy the machine it is run on if not used properly). You will need to change the partition destination.
* input the install code and install!
* NOTE: it may be better to -->* report bugs!-->
= Reporting issues =
