Changes

OpenVPN VPN Bridging (view source)

246 bytes removed , 20:55, 31 January 2010

no edit summary

* sudo yum install bridge-utils

* sudo nano /etc/openvpn/~~bridge~~openvpn-~~start~~startupAdd this at the end of the file:

~~#!/bin/bash~~

#################################

# Set up Ethernet bridge on Linux

</nowiki></pre>

* sudo nano /etc/openvpn/~~bridge~~openvpn-~~stop~~shutdown

#!/bin/~~bash~~sh

####################################

brctl delbr $br

~~for t in $tap; do~~ openvpn --rmtun --dev $t~~done~~tap

if [ "$eth_ip" != "" ]; then

ifconfig $eth $eth_ip netmask $eth_netmask broadcast $eth_broadcast

fi

~~</nowiki></pre>~~

* sudo chmod +x /etc/openvpn/bridge-start; sudo chmod +x /etc/openvpn/bridge-stop

* sudo nano /etc/openvpn/openvpn-startup

~~Add one line at the end of the file:~~

~~<pre><nowiki>~~

~~/etc/openvpn/bridge-start~~

~~</nowiki></pre>~~

* sudo nano /etc/openvpn/openvpn-shutdown

~~<pre><nowiki>~~

~~/etc/openvpn/bridge-stop~~

</nowiki></pre>

ifconfig 192.168.1.2 255.255.255.0

</nowiki></pre>

Replace 192.168.1.2 with the IP address you want your client to use.

[[Category: VPN]]

287

edits