Ubuntu Installation Troubleshooting
From Amahi Wiki
Loss of Network Connectivity
Double check your network settings with ifconfig and route -n. These should be the settings that you use in the installation. If these are not correct you can change the ip address by issuing the command
| bash code |
|---|
sudo ifconfig eth0 192.168.1.14 netmask 255.255.255.0 up
|
assuming 192.168.1.14 is your IP address. The route can be changed with
| bash code |
|---|
sudo route add default gw 192.168.1.1
|
assuming 192.168.1.1 is the address of your router.
This is especially important if you are doing a headless install
