Amahi 8 Troubleshooting
From Amahi Wiki
Revision as of 00:10, 9 September 2015 by David Schwartz (talk | contribs) (Created page with "<!-- This page is crated automaticaly by a script. This part is commented and shall not show --> <!--At the top of the page can be vissible one of the following tags..--> ...")
Work In Progress | |
---|---|
This article is currently undergoing major expansion or restructuring. You are welcome to assist by editing it as well. If this article has not been edited in several days, please remove this template. |
After performing the upgrade, the dhcp and dns server are not functional.
To verify if the service is functional do the following from a command line:
sudo systemctl status dnsmasq.service
If its not working you will get a message similer to below with a failed status:
- dnsmasq.service - DNS caching server.
- Loaded: loaded (/usr/lib/systemd/system/dnsmasq.service; enabled)
- Active: failed (Result: exit-code) since Tue 2015-09-08 10:38:40 MST; 6s ago
- Process: 7798 ExecStart=/usr/sbin/dnsmasq -k (code=exited, status=2)
- Main PID: 7798 (code=exited, status=2)
During the upgrade libvirtd was installed. libvirtd uses dnsmasq for virtual machines. This caused a conflict. To verify this is the issue do the following commands:
sudo lsof -i :53
- COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
- dnsmasq 1308 nobody 6u IPv4 20640 0t0 UDP localhost.localdomain:domain
- dnsmasq 1308 nobody 7u IPv4 20641 0t0 TCP localhost.localdomain:domain (LISTEN)
ps -ef| grep <number in bold above>
- nobody 1308 1 0 10:04 ? 00:00:00 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --dhcp-script=/usr/libexec/libvirt_leaseshelper
- root 1309 1308 0 10:04 ? 00:00:00 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --dhcp-script=/usr/libexec/libvirt_leaseshelper
if you see something like --conf-file=/var/lib/libvirt/dnsmasq/default.conf then you can fix the dnsmasq problem by issuing the following command and then rebooting.
sudo systemctl disable libvirtd
sudo reboot