OpenVPN troubleshooting

Typical problems with the VPN:

• You cannot VPN into your network from your very own network (kinda duh)
• You cannot login two users simultaneously
• You cannot login to your network from another network with the exact same settings. You can probably reach your own HDA, but not other systems in the network, due to routing (the HDA has direct connection via the VPN tunnel).
• Check that you have port forwarded 1194 udp.

Moving to TCP

If UDP is not working because of shitty ISPs (see list below). Also you will have to change the port forward to TCP (or TCP and UDP) instead of UDP.

Client side: (Windows)

Edit these two files:

  C:\Program Files (x86)\HDAConnect\config\HomeHDA.opvn

Right click the red A, click edit settings. If you have a thing saying "HomeHDA > " then mouse over and click edit settings. Change

    proto udp

to

    proto tcp

If for some reason the DDNS (yourhda.com) is not working but your control panel is updating, the add this line at the top of the config file.

      remote YOUR_IP_HERE

Client Side (Linux/Mac)

Similarly, locate the configuration file and change

   proto udp

to

   proto tcp

On the Server side

Edit this file:

   /etc/openvpn/amahi.conf

change "proto udp" to "proto tcp"

Restart both sides and you are now using openvpn over tcp. And add your isp below.

List of bad ISPs

Please add your isp if you need this work-around:

• Bell Canada