There are three major steps in getting things going

: Download the [http://dl.amahi.org/marvell/ Amahi ''rootfs'' image] the use the script to extract and put it into an empty USB hard drive, USB flash drive, or SD card (depending on what your device supports), formatted as ext3.

: Boot your device using the drive or card you created in step 1. Find out the IP it got assigned from your existing DHCP server (typically your router). Go to [http://www.amahi.org/ Amahi] and set up a profile for your HDA.

: Install Amahi, by loading <code>http://plug_ip:2000</code> and entering the install code you got when you [https://www.amahi.org/user created your Amahi profile].