Trusted, Bureaucrats, Administrators
12,424
edits
Changes
From Amahi Wiki
→Detailed Setup Instructions
Move to "1. General", and press enter.
'''1.1''' Host address Backend setup<br />
Most of the options on the first page do not need to be changed. the local backend ip address and master backend ip address are the same if you are only running one backend. The value for them is the ip address of your hda ex. 192.168.1.19 or 192.168.2.87.
Now move to the next page with the next button (Sometimes covered by gnome task bar it is the bottom most left button).
'''1.2''' Locale settings<br />
TV format is NTSC for North America and Japan, PAL for most parts of Europe and everywhere else. The VBI format is whatever you selected for above. NTSC Closed Caption for NTSC and PAL Teletext for PAL.
For your local timezone, input your local timezone. pretty self-explanatory.
'''1.3''' Misc. Settings<br />
Master Backend Override: I think this means the backend will move stuff if it finds things in the videos directory on its machine.
Disable Fire-wire Reset: Reset fire-wire bus when fire-wire recorders stop responding. Enable only if it causes problems.
'''1.4''' EIT Scanner Options<br />
EIT Transport Timeout: maximum time to wait on data before moving to next channel.
Backend Idle...: time after the recorder finishes that the backend will go to get new EIT data.
'''1.5''' Shutdown/Wakeup Options:<br />
Startup command: a command run right after the Backend or BE is finished loading.
Pre shutdown check command: command run to check if backends can be shut off.
'''1.6''' Backend Wakeup settings<br />
Delay between Wakeup attempts: umm...
Wake command: Command used to wake slaves
'''1.7''' Backend Control<br />
Backend stop command: command to stop the local backend
Backend start command: command to start the local backend
'''1.8''' Job Queue <br />
Maximum Simultaneous...: max jobs going at a time
Various allows: allow certain jobs to take place on this machiene.
'''1.9''' Job Queue (Global)<br />
Run Jobs on Original...: when doing an operations on a video, do it on the backend that recorded it.
Save orig. files after trans-code: keep original file instead of deleting them after trans-coding them.
'''1.10''' Job Quene<br />
User job #1 Description: desc. for user job #1
same for all of the rest.
'''1.11''' UNNP Server settings<br />
Video Content to show to Windows Media Player Client: show recording or Videos
Upnp media update time: time between the first check the backend does of files to server via. upnp and the next one.
'''2.''' Capture Cards<br />
being done some other time
