Difference between revisions of "Access HDA over SSL"

From Amahi Wiki
Jump to: navigation, search
Line 78: Line 78:
 
<pre><nowiki>cd /etc/httpd/conf.d/
 
<pre><nowiki>cd /etc/httpd/conf.d/
 
cp 01-platform.conf 01-platform-ssl.conf</nowiki></pre>
 
cp 01-platform.conf 01-platform-ssl.conf</nowiki></pre>
You need to modify 01-platform-ssl.conf and replace the line with "<VirtualHost *:80>" to the following lines...
+
You need to modify 01-platform-ssl.conf  
 +
<pre><nowiki>nano 01-platfrom-ssl.conf</pre>
 +
...replace the line "<VirtualHost *:80>" with the following lines...
 
<pre><nowiki><VirtualHost *:443>
 
<pre><nowiki><VirtualHost *:443>
 
SSLEngine on
 
SSLEngine on

Revision as of 14:13, 27 March 2017

Here I will discuss accessing your Amahi HDA over SSL. This means that you will go to your home page http://hda and it will automatically convert to https://hda.

NOTE: Following this guidance is at your own risk and could break your HDA. This has been tested with Amahi 10, Fedora 25 which is still in development.

Why is this recommended?

Currently you access your Amahi HDA control panel unsecured. This means that anyone sniffing your network can get the password to your HDA. If your password is compromised then this means they can log in to possibly modify your shares or even access SSH (if you have it enabled). So I recommend anyone using SSH to at least have SSL access to their Amahi HDA.

Sag47 00:38, 15 June 2011 (PDT)


NOTE: This may interfere with Hosting a Website tutorial.

Prerequisites

I assume you already have Fedora 23 installed with Amahi up and running.

Instructions

All commands must be run as root user.

Back up apache configurations

Before doing anything be sure to back up your apache configurations!

(cd /etc/httpd/ && tar -czf apache-backup.tar.gz conf.d/)

This way if you accidentally screw something up we can start over.

Install mod_ssl

mod_ssl for Apache2 is required for this functionality. Luckily Fedora makes it easy.

dnf -y install mod_ssl

Generate your own certificates

NOTE: Leaving defaults will not make your server less secure. Make sure that you change "asecretpassword" in the commands below to something else. Otherwise any commands which don't have "asecretpassword" in it can be copied and pasted. This has to do with the challenge password for the private key. If you don't understand what I mean then you should read about public-key cryptography which is essentially what SSL uses.

1. Create a sub-folder of /etc/httpd/ called ssl.crt

mkdir /etc/httpd/ssl.crt

2. Generate a new Secure key file, called server.key.org, and output the file to /etc/httpd/ssl.crt (our newly created folder) **REMEMBER TO CHANGE "asecretpassword" TO A PASSWORD OF YOUR CHOICE**.

openssl genrsa -des3 -passout pass:asecretpassword -out /etc/httpd/ssl.crt/server.key.org 1024

The output should look something like:

Generating RSA private key, 1024 bit long modulus

.........++++++
....++++++

e is 65537 (0x10001)

3. Create server.crt and server.csr from our newly self-generated key (server.key.org):

openssl req -new -passin pass:asecretpassword -passout pass:asecretpassword -key /etc/httpd/ssl.crt/server.key.org -out /etc/httpd/ssl.crt/server.csr -days 3650
openssl req -x509 -passin pass:asecretpassword -passout pass:asecretpassword -key /etc/httpd/ssl.crt/server.key.org -in /etc/httpd/ssl.crt/server.csr -out /etc/httpd/ssl.crt/server.crt -days 3650

The output of these files will look something like:

You are about to be asked to enter information that will be incorporated

into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [XX]:
State or Province Name (full name) [ ]:
Locality Name (eg, city) [Default City]:
Organization Name (eg, company) [Default Company Ltd]:
Organizational Unit Name (eg, section) [ ]:
Common Name (eg, your name or your server's hostname) [ ]:
Email Address [ ]:

Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password [ ]:

An optional company name [ ]:

You should make entries at each stage in the second section (after Country Name...).

4. Create a thrid file, server.key, from from our self-generated key (server.key.org):

openssl rsa -passin pass:asecretpassword -in /etc/httpd/ssl.crt/server.key.org -out /etc/httpd/ssl.crt/server.key

5. Create another sub-folder of /etc/httpd/ called ssl.key, and move our newly created server.key to this folder.

mkdir /etc/httpd/ssl.key
mv /etc/httpd/ssl.crt/server.key /etc/httpd/ssl.key/server.key
chmod 400 /etc/httpd/ssl.key/server.key

Modify apache initialization

Modify the apache initialization for allowing SSL virtual hosts. Just in case you decide you want more than one virtual host to be capable of SSL. (NOTE: NameVirtualHost has no effect and will be removed in the next release /etc/httpd/conf.d/00-init.conf:1; this section can be ommited).

(cd /etc/httpd/conf.d/ && echo 'NameVirtualHost *:443' >> ./00-init.conf)

Create your HDA SSL virtual host

Now you need your HDA virtual host over SSL. The default configuration is pretty good so let's use that.

cd /etc/httpd/conf.d/
cp 01-platform.conf 01-platform-ssl.conf

You need to modify 01-platform-ssl.conf

<nowiki>nano 01-platfrom-ssl.conf

...replace the line "<VirtualHost *:80>" with the following lines...

<VirtualHost *:443>
SSLEngine on
SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
SSLCertificateFile /etc/httpd/ssl.crt/server.crt
SSLCertificateKeyFile /etc/httpd/ssl.key/server.key

Leave the rest of the file intact as you found it. This way the server utilizes the SSL certificates you created for yourself.

Create a redirect from HDA to secured HDA

Modify /etc/httpd/conf.d/01-platform.conf and go down to the rewrite rules. Below the last rewrite rule just before the line "# this was only for FCGI" put the following code.

RewriteCond %{HTTPS} !=on
RewriteRule ^(.*) https://%{SERVER_NAME}$1 [R,L]

Restart the Apache2 server

Restart your server to apply the changes you've made. If you did everything right you shouldn't receive any warnings when restarting the server.

systemctl restart httpd

Finished

Now that you're done go ahead and visit http://hda and watch it turn into https://hda! Understand that the certificates you generated have not been verified by a certificate authority so you'll need to confirm a security exception.

Troubleshooting

Apache error

If you get an error when you restart Apache (httpd) about a bad configuration then it is probably because you directly copied and pasted from this wiki. When you copy the code then sometimes a null character is also copied which is hidden to most text editors.

A way to solve this is to delete and retype the first an last character of each line which Apache is complaining about. You can then test your configuration again.

service httpd configtest

If all goes well and you get "Syntax OK" then you can start your Apache server again.

systemctl restart httpd

If all things end badly and you can't figure it out then it is possible to restart this tutorial from scratch. Just start it over.

How do I start over?

Run the following command sequence.

dnf -y erase mod_ssl
rm -rf /etc/httpd/ssl.crt
rm -rf /etc/httpd/ssl.key
(cd /etc/httpd/conf.d/ && rm -f *-ssl.conf​)
(cd /etc/httpd/ && tar -xzf apache-backup.tar.gz)
systemctl restart httpd

Then you can start the instructions again from step one.

See also

Secure App Access
Access Joomla over HTTPS