Difference between revisions of "Access HDA over SSL"

From Amahi Wiki
Jump to: navigation, search
Line 54: Line 54:
 
{{Code|cd /etc/httpd/conf.d/
 
{{Code|cd /etc/httpd/conf.d/
 
cp 01-platform.conf 01-platform-ssl.conf}}
 
cp 01-platform.conf 01-platform-ssl.conf}}
You need to modify 01-platform-ssl.conf and change <VirtualHost *:80> to the following...
+
You need to modify 01-platform-ssl.conf and replace the line with "<VirtualHost *:80>" to the following lines...
 
{{Text|<VirtualHost *:443>
 
{{Text|<VirtualHost *:443>
 
SSLEngine on
 
SSLEngine on

Revision as of 06:24, 6 July 2011

Warning.png WARNING
This is recommended only for advanced users, proceed with caution.


Here I will discuss accessing your Amahi HDA over SSL. This means that you will go to your home page http://hda and it will automatically convert to https://hda.

Why is this recommended?

Currently you access your Amahi HDA control panel unsecured. This means that anyone sniffing your network can get the password to your HDA. If your password is compromised then this means they can log in to possibly modify your shares or even access SSH (if you have it enabled). So I recommend anyone using SSH to at least have SSL access to their Amahi HDA.

Sag47 00:38, 15 June 2011 (PDT)

Prerequisites

I assume you already have Fedora 14 installed with Amahi up and running.

I have ran through the instructions here on Fedora 12 and everything works.

Guerilla 13:31, 16 June 2011 (GMT)

Instructions

Install mod_ssl

mod_ssl for Apache2 is required for this functionality. Luckily Fedora makes it easy.

bash code
​yum -y install mod_ssl​


Generate your own certificates

NOTE: Leaving defaults will not make your server less secure. Make sure that you change "asecretpassword" in the commands below to something else. Otherwise any commands which don't have "asecretpassword" in it can be copied and pasted. This has to do with the challenge password for the private key. If you don't understand what I mean then you should read about public-key cryptography which is essentially what SSL uses.

bash code
​mkdir /etc/httpd/ssl.crt openssl genrsa -des3 -passout pass:asecretpassword -out /etc/httpd/ssl.crt/server.key.org 1024 openssl req -new -passin pass:asecretpassword -passout pass:asecretpassword -key /etc/httpd/ssl.crt/server.key.org -out /etc/httpd/ssl.crt/server.csr -days 3650 openssl req -x509 -passin pass:asecretpassword -passout pass:asecretpassword -key /etc/httpd/ssl.crt/server.key.org -in /etc/httpd/ssl.crt/server.csr -out /etc/httpd/ssl.crt/server.crt -days 3650 openssl rsa -passin pass:asecretpassword -in /etc/httpd/ssl.crt/server.key.org -out /etc/httpd/ssl.crt/server.key mkdir /etc/httpd/ssl.key mv /etc/httpd/ssl.crt/server.key /etc/httpd/ssl.key/server.key chmod 400 /etc/httpd/ssl.key/server.key​


Edit ssl.conf

Edit the current /etc/httpd/conf.d/ssl.conf and change the following lines to match the code below.

bash code
​SSLCertificateFile /etc/httpd/ssl.crt/server.crt SSLCertificateKeyFile /etc/httpd/ssl.key/server.key​


Modify apache initialization

Modify the apache initialization for allowing SSL virtual hosts. Just in case you decide you want more than one virtual host to be capable of SSL.

bash code
(cd /etc/httpd/conf.d/ && echo 'NameVirtualHost *:443' >> ./00-init.conf)


Create your HDA SSL virtual host

Now you need your HDA virtual host over SSL. The default configuration is pretty good so let's use that.

bash code
​cd /etc/httpd/conf.d/ cp 01-platform.conf 01-platform-ssl.conf​

You need to modify 01-platform-ssl.conf and replace the line with "<VirtualHost *:80>" to the following lines...

Text
​<VirtualHost *:443> SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile /etc/httpd/ssl.crt/server.crt SSLCertificateKeyFile /etc/httpd/ssl.key/server.key​

This way the server utilizes the SSL certificates you created for yourself.

Create a redirect from HDA to secured HDA

Modify 01-platform.conf and go down to the rewrite rules. Below the last rewrite rule just before the line "# this was only for FCGI" put the following code.

Text
​RewriteCond %{HTTPS} !=on RewriteRule ^(.*) https://%{SERVER_NAME}$1 [R,L]​

Restart the Apache2 server

Restart your server to apply the changes you've made. If you did everything right you shouldn't receive any warnings when restarting the server.

bash code
​service httpd restart​


Finished

Now that you're done go ahead and visit http://hda and watch it turn into https://hda! Understand that the certificates you generated have not been verified by a certificate authority so you'll need to confirm a security exception.

See also

Secure App Access
Access Joomla over HTTPS