Difference between revisions of "Ad-blocking"

From Amahi Wiki
Jump to: navigation, search
Line 70: Line 70:
 
* Create file /etc/init.d/pixelserv
 
* Create file /etc/init.d/pixelserv
 
  nano /etc/init.d/pixelserv
 
  nano /etc/init.d/pixelserv
and copy the following to it:
+
and copy the following to it (changing the IP addresses where neccessary):
<br /><b>Note: Change the IP addresses, and you will need net-tools installed on the system as a precursor</b>
 
 
  #! /bin/sh
 
  #! /bin/sh
 
  # /etc/init.d/pixelserv
 
  # /etc/init.d/pixelserv

Revision as of 17:16, 24 June 2015


Msgbox-WOPr.png Work In Progress
This article is currently undergoing major expansion or restructuring. You are welcome to assist by editing it as well. If this article has not been edited in several days, please remove this template.


This section will document how to run your HDA as a network wide ad-blocking tool, utilising DNS redirects and a small pixel server.



Fedora 19

Precusors -

  • You'll need net-tools installed to use ifconfig
yum install net-tools
  • This guide assumes your network interface is named p2p1 and your HDA IP address is 192.168.1.2. Check with ifconfig, and change this guide where neccessary.


Get Ad List

Change DNSMasq config

Bind Apache to main IP address

  • Edit the Apache config file using a file editor:
nano /etc/httpd/conf/httpd.conf
  • Add your HDAs IP address to this section in the conf file:
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 192.168.1.2:80
  • Restart Apache
service httpd restart


Pixel Server

  • You need to download Pixelserv to the HDA:
wget http://proxytunnel.sourceforge.net/files/pixelserv.pl.txt 
  • Move and rename the Pixelserv binary:
mv pixelserv.pl.txt /usr/local/bin/pixelserv
  • Edit pixelserv using a file editing program of your choice
nano pixelserv
  • Change the IP address to a free one of your choice (eg. 192.168.1.99)
$sock = new IO::Socket::INET (  LocalHost => '0.0.0.0',

change to

$sock = new IO::Socket::INET (  LocalHost => '192.168.1.99',
  • Change permissions
chmod 755 /usr/local/pixelserv 

  • Create file /etc/init.d/pixelserv
nano /etc/init.d/pixelserv

and copy the following to it (changing the IP addresses where neccessary):

#! /bin/sh
# /etc/init.d/pixelserv
#

# Carry out specific functions when asked to by the system
case "$1" in
   start)
     echo "Creating Interface "
     ifconfig p2p1:0 192.168.1.99
     echo "Starting pixelserv "
     /usr/local/bin/pixelserv &
     ;;
   stop)
     echo "Stopping script pixelserv"
     pkill -9 pixelserv &
     echo "Killing Interface "
     ifconfig p2p1:0 down
     ;;
   *)
     echo "Usage: /etc/init.d/pixelserv {start|stop}"
     exit 1
     ;;
esac
exit 0
  • Change permissions
chmod 755 /etc/init.d/pixelserv


Enjoy ad-free network on ALL devices!