Changes

From Amahi Wiki
Jump to: navigation, search
<!--<div style="border: 1px solid #A3B1BF; padding: .8em 1em; background-color: #E6F2FF; margin: 0px 1em;"center'''NOTE:''' The Amahi [https://www.amahi.org/apps/disk-wizard Disk Wizard] application provides this functionality via Amahi 7 Dashboard. </div><br />-->{{MessageBox|
backgroundcolor = #faa|
image =Warning.png|
heading =WARNING|
message = This is recommended only for advanced ''Advanced'' users, proceed with caution.}}</center>[[Adding_Hard_Drives_101|Adding hard drives 101]] is a simple guide designed for users with little or no Linux experience<div style="border: 1px solid #A3B1BF; padding: . 8em 1em; background-color: #E6F2FF; margin: 0px 1em;">
'''NOTE:''' The Amahi [[Adding_drives_to_your_HDA|Adding drives to your HDA]https://www.amahi.org/apps/disk-wizard Disk Wizard] is for more novice users that is a bit shorter and less elaborate than application (Amahi 8 or greater '''ONLY''') provides this pagecapability from the Dashboard UI.
More </div><br />The purpose of this tutorial is to make partitioning, formatting, and mounting hard drives can be added in your the Amahi HDA server simple for additional storage spacethose new to Linux.
WeIn order to keep this process simple, it's important '''NOT'''ll detail how to add such connect additional hard drives, and how to put them to good usedrive(s) until the end of the [[Adding_a_second_hard_drive_to_your_HDA#Preparation|Preparation]] step.
=Disclaimer=
* [https://www.amahi.org Amahi] cannot be held responsible for any data breakage or destruction arising from the use or misuse of this script. We provide it as a service in good will. You accept this automatically if you use the script.
* This is a how-to on adding additional drives to your HDA[http://en.* Amahi cannot be held responsible for any data breakage or destruction arising from the use or misuse of this scriptwikipedia. We provide it as a service in good will. You accept this automatically if you use the script.* This page and script does not support org/wiki/GUID_Partition_Table GUID-partitioned ] hard drives (such as drives those previously used in a Mac or have GPT partition tables). You can find what your partition is like with <code>fdisk -l</code> =OS Detects Drive = Open a Terminal or remotely connect (ssh, ...) to the OS, and type the following command: <div style="border: 1px solid #A3B1BF; padding: .5em 1em; background-color: #E6F2FF; margin: 3px 3px 1em 3px;"> ls -1 /dev/disk/by-id/ | egrep -v "part|scsi"</div> Look for the line that matches the hard drive you added. IDE and SATA hard drives will start with '''ata-''' and USB hard drives will start with '''usb-'''.<br/>Look for your hard drive model and serial numberare not supported in this tutorial.
Example: <div style="border: 1px solid #A3B1BF; padding* [http: //en.wikipedia.5em 1em; color: #000; backgroundorg/wiki/GNU_nano nano] is used as the command-colorline text editor (refer to [http: #E6F2FF; margin: 3px 3px 1em 3px;"> [gb@hda ~]$ ls -1 /dev/diskwww.howtogeek.com/howto/by-id42980/ | egrep -v "part|scsi" atathe-Hitachi_HDS722020ALA330_JK1131YAGDU37V atabeginners-ST31000528AS_6VP08W65 ataguide-ST3750640A_3QD0LJN8 atato-ST3750640A_5QD27A57 atanano-WDC_WD10EADSthe-00L5B1_WDlinux-WCAU4C700358 usbcommand-ST310003_33AS_9E1CA6FFFFFF-0:0 usbline-ST375064_0A_2009031309E2text-0:0<editor/div>beginners guide to nano] as needed).
=Prerequisites=
[[Open Terminal as root|In a Terminal, as root]], verify disk tools are installed by executing:<br />
[[Open Terminal as root|In a Terminal, as root]], type the following (two) commands: * Fedora
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px; text-align: left">
yum dnf -y install pmount fuse fuse-libs ntfs-3g util-linux-ng parted nano
</div>
* :'''NOTE:''' <code>yum</code> (deprecated) has been replaced with <code>dnf</code> as the package manager for Fedora 23 and greater.Ubuntu
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px; text-align: left">
sudo apt-get -y install gparted
</div>
Drives :'''NOTE:''' Hard drives must be formatted as '''MBR''' not '''GUID/GPT''' for ''hda-diskmount '' to recognize the diskwork correctly.
=Partition and Format Hard DrivePreparation=[[Open_Terminal_as_root|In terminal as root]], execute the following to capture current hard drive configuration:<div style="border: 1px solid #A3B1BF; padding: .5em 1em; background-color: #E6F2FF; margin: 3px 3px 1em 3px;"> ls -l /dev/disk/by-id/ > before.txt cat before.txt</div>
This step is optional, and should only be executed if you want to delete the content of your new hard drive, or if the hard drive has not yet been formatted:EXAMPLE: lrwxrwxrwx 1 root root 9 2010-02-18 03:24 ata-Hitachi_HDS722020ALA330_JK1131YAGDU37V -> ../../sda lrwxrwxrwx 1 root root 10 2010-02-18 03:24 ata-Hitachi_HDS722020ALA330_JK1131YAGDU37V-part1 -> ../../sda1
You should (unless you have a good reason not to) use GParted to partition Power ''OFF'' the HDA and format your install/connect any additional hard drive(s).<br/>Not having X installed would qualify as a good reason! In such cases, either use SSH X11 Forwarding (Google that if you'd like to use this), or [[Adding_a_second_hard_drive_to_your_HDA#Using_cfdisk|use cfdisk]] from a [[Open Terminal as root|Terminal, as root]].
You'll probably want to create a single partition, and format it as =Identify=Power ''ext3ON''.<br/>Note that Windows can't read ext3 partitions, so if you want dual-boot Windows on your Amahi PC, or if you intend to connect this hard drive to a Windows computer later, you should format as NTFS instead, the HDA and you should do that on Windows before you connect collect data about the new hard drive in your HDAconfiguration.<br/>Remember that using NTFS partitions on Linux will be slower that using ext3 partitions Again, so you should only use NTFS if you really need it.<br/>How much slower: compare the blue bars (NTFS-3G) with the red bars (ext3) on [http://www.tuxera.com/products/tuxera-ntfs-commercial/performance/ save this graph]to a text file for reference.
To know what device (/dev/sdX) you need to partition and format, use the following command, in a [[Open Terminal as rootOpen_Terminal_as_root|Terminal, In a terminal as root]], execute the following to capture current hard drive configuration: <div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;"> ls -l /dev/disk/by-id/> after.txt cat after.txt
</div>
Find the row corresponding to your hard drive, and look at the end of the line to identify the correct device to use. Example:<div style="borderEXAMPLE: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;"><small> [gb@hda ~]$ ls -l /dev/disk/by-id/ total 0
lrwxrwxrwx 1 root root 9 2010-02-18 03:24 ata-Hitachi_HDS722020ALA330_JK1131YAGDU37V -> ../../sda
lrwxrwxrwx 1 root root 10 2010-02-18 03:24 ata-Hitachi_HDS722020ALA330_JK1131YAGDU37V-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 2010-02-18 03:24 ata-ST31000528AS_6VP08W65 -> ../../sdb
</small>
</div>
In the above example, :'''FYI:''' IDE/dev/sdb would be what I would select in GParted (or use on the cfdisk command). sda in my primary SATA hard drive, drives will start with '''ata-''' and sdb my second USB hard drivedrives will start with '''usb-'''.<br/>
==Using GParted (Ubuntu) =Partition/Format=From Compare the HDA desktop (or using VNC), [[Open Terminal as root]] difference between before.txt and type '''gparted''' after.txt to launch determine the GParted applicationnew hard drive(s) device name. This can be done automatically.
Select [[Open Terminal as root|In a Terminal, as root]], execute the device (following:<div style="border: 1px solid #A3B1BF; padding: .5em 1em; background-color: #E6F2FF; margin: 3px 3px 1em 3px;"> diff before.txt after.txt</dev/sdX) that you found above.div>
In the above example, :EXAMPLE: lrwxrwxrwx 1 root root 9 2010-02-18 03:24 ata-ST31000528AS_6VP08W65 -> ../dev../sdb would be what I would select in GParted.
There At this point, partition and format the hard drive(s) if they are many easy new. For hard drive(s) that contain data to follow guides online on how to use GParted. You should Google for onebe preserved, skip to find one that seems clear to youthe [[Adding_a_second_hard_drive_to_your_HDA#Mount|Mount]] step.
Here==Command-line (Fedora)==To partition the hard drive(s), substitute sdX with hard drive device name, such as ''sdb''s a general introduction on [http://www.youtube.com/watch?v=vdWkdrnNGRg YouTube]. Just use ext3 or ext4 instead of fat32 in you follow that tutorial.
If you have [[Open Terminal as root|In a drive Terminal, as root]], execute the following:<blockquote> 2<div style="border: 1px solid #A3B1BF; padding: .5em 1em; background-color: #E6F2FF; margin: 3px 3px 1em 3px;"> parted /dev/sdX</div></blockquote>Up to 2TB, at the ''(parted)'' prompt, enter:# mklabel msdos (answer ''yes'' if prompted)# mkpart primary 0 TB% 100%# quit<br />Greater than 2TB, at the ''(parted)'' prompt, there is an in-depth guide below enter:# mklabel gpt (that may be outdatedanswer ''yes'' if prompted)# mkpart primary 0% 100%# quit<br />Verify the new partition was created:<div style="border: 1px solid #A3B1BF; padding: . 5em 1em; background-color: #E6F2FF; margin: Instead, it is possible to use GParted with the following steps3px 3px 1em 3px;"> ls -l /dev/disk/by-id/</div>:EXAMPLE:* select the correct drive in the dropdown on the top right of GParted lrwxrwxrwx 1 root root 9 2010-02-18 03:24 ata-Hitachi_HDS722020ALA330_JK1131YAGDU37V -> ../../sda lrwxrwxrwx 1 root root 10 2010-02-18 03:24 ata-Hitachi_HDS722020ALA330_JK1131YAGDU37V-part1 -> ../../sda1* click Device lrwxrwxrwx 1 root root 9 2010-02-18 03:24 ata-ST31000528AS_6VP08W65 -> Create Partition Table../. ./sdb <span style="color:#FF0000"> Advanced '''lrwxrwxrwx 1 root root 9 2010-02-18 03:24 ata-ST31000528AS_6VP08W65-part1 -> (Choose ../../sdb1''gpt')* then create your partition as normally instructed** I use </ext4** add an appropriate labelspan>
The new partition is named sdX1 (i.e. sdb1 in <span style="color:#FF0000">'''RED'''</span>).
Format the partition, execute (can substitute ext3):<bblockquote>NOTE<div style="border:1px solid #A3B1BF; padding: .5em 1em; background-color: #E6F2FF; margin: 3px 3px 1em 3px;"> mkfs.ext4 -j /dev/sdX1</div></bblockquote> GParted supports GUID-partitioned drives, however, these directions and script do not support it at the moment.
==Using cfdisk (Ubuntu/Fedora)==From a Repeat the [[Open Terminal as rootAdding_a_second_hard_drive_to_your_HDA#Partition/Format|terminal, as rootPartition/Format]], type '''cfdisk /dev/sdX''' step for each hard drive to launch the cfdisk applicationbe partitioned and formatted.
If you have ==GParted (Ubuntu)==From the HDA desktop (or using VNC), [[Open_Terminal_as_root|In a GUID-partitioned drive, cfdisk will complain. GUID partitions are not supportedterminal as root]] and type '''gparted''' to launch the application.
Make sure to replace Here's a general introduction on [http:/dev/sdX with the actual device (egwww. youtube.com/dev/sdb) watch?v=vdWkdrnNGRg YouTube]. Just use ''ext3'' or ''ext4'' instead of ''fat32'' if you follow that you found abovetutorial.
If your For drives > 2.0 TB, following these steps:* Choose hard drive contains existing partitions, select them one by one at disk in the dropdown menu (top right)* Select Device > Create Partition Table... > Advanced > (using up/down arrow keys), then select the '''[ Delete ]'Choose 'gpt' action (using the left/right arrow keys), then hit ENTER.* Create partition
You should now only have Free Space listed at the top.<br/>
Select the '''[ New ]''' action, and accept the default (Primary, and size).
You should now have a single partition listed at the top, of type Linux.:<b>NOTE:<br/b>Select the ''' [ Write http://gparted.org GParted]''' actionsupports GUID-partitioned drives, however, then '''[ Quit ]'''the hda-mount script do not support currently.
Now that you partitioned your Repeat the [[Adding_a_second_hard_drive_to_your_HDA#Partition/Format|Partition/Format]] step for each hard drive, you need to format your newly created partitionbe partitioned and formatted.<br/>To format as EXT3, use this command:
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">Mount= mkfsMount the hard drive(s)/partition(s) for use in the HDA.ext3 -j /dev/sdX1</div>
Replace ext3 with ext4 in the above command :'''NOTE:''' If you prefer not to format your partition as EXT4 instead of EXT3use ''hda-diskmount'', refer to [[Adding_a_second_hard_drive_to_your_HDA#hda-diskmount|Troubleshooting ''hda-diskmount]].
'''/dev/sdX1''' in the above command refers to the partition your created in cfdisk.<br/>Go back in cfdisk, and check the ''Name'' column if you're unsure.<br/>If you see ''sdb1'' in the name column, you should use '''/dev/sdb1''' in the above command. ==Partition over 2.1TB==[[Partitions_Over_2.1_TB|Here is a work around]] for drives with partitions over 2.1TB like the new 3 & 4TB TB drives. =Mount Hard Drive= ==Using hda-diskmount script==A script is provided with Amahi that will look for unmounted partitions in your system, and mount any it finds. [[Open Terminal as root|In a Terminal, as root]], type execute the following command(it will create drive1, drive2, etc and mount the hard drive(s) automatically): <div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">
hda-diskmount
</div>
Example:<div style="borderEXAMPLE: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px; text-align: left;"><small> [root@hda ~]$ hda-diskmount
****************************************************************
Ignoring /dev/sda1 - already in /etc/fstab or mounted
You may want your system to mount it every time you boot.
To do so, add this line VERY CAREFULLY to /etc/fstab and reboot:
<strong style="color:blue">UUID=9d972abc547b073d-1639e591-44df4913-a60eb4fb-668618d40236 7c5084353979 /var/hda/files/drives/drive1 ext4 defaults 1 2</strong>
****************************************************************
All Linux, Windows and Mac partitions on non-removable disks have been mounted
</small>
</div>
 
Do '''not''' edit /etc/fstab just yet. What you'll need to add there will depend on how you want to use the extra storage. More about that below.<br/>
Just note down the information in bold (green, red and blue). We'll use them below.
 
Note about ext4 in the blue line above: that doesn't necessarily mean your partition is formatted as ext4. It means the ext4 driver will be used to mount your partition. Since that driver is backward compatible, it can be safely used to mount ext2, ext3 and ext4 partitions.
 
If you get something like ''Disk /dev/dm-0 doesn't contain a valid partition table'' or ''mount: unknown file system type 'lvm2pv''' its because you have LVM's that 'fdisk' can not recognize (or something similar). It's nothing to worry about if you get that when executing the hda-diskmount script.
 
If hda-diskmount does not recognize your new drive and you are trying to add a GPT partitioned 2+TB drive, you may need to edit your hda-diskmount script. You can a fix for this issue at this [https://forums.amahi.org/viewtopic.php?f=15&t=2326&p=11617 forum thread].
 
Failure to recognize GPT drive:
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px; text-align: left;">
<small>
[root@hda ~]$ hda-diskmount
****************************************************************
Ignoring /dev/sdf1 - already mounted
Ignoring /dev/sdf1 - already in /etc/fstab as UUID=b8c125e3-4199-4b56-a566-397fdd8bab8a
****************************************************************
No usable Linux, Windows or Mac partitions found on your disks.
</small>
</div>
 
Example fix to /usr/sbin/hda-dismount
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px; text-align: left;">
<small>
# Now for the real work
drivesntfs=`fdisk -l 2> /dev/null | grep -i 'ntfs' | awk -F '/| ' '{print $3}'`
drivesfat=`fdisk -l 2> /dev/null | grep -i 'fat32' | awk -F '/| ' '{print $3}'`
driveshfs=`fdisk -l 2> /dev/null | grep -i 'HFS' | awk -F '/| ' '{print $3}'`
drivesext=`fdisk -l 2> /dev/null | <strong style="color:red">egrep -iw 'Linux|GPT'</strong> | egrep -v 'swap|LVM' | awk -F '/| ' '{print $3}'`
</small>
</div>
 
If you have changed the order of your installed hard drives, hda-diskmount may return the following message:
 
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">
Ignoring /dev/sda1 - already in /etc/fstab as /dev/sda1
This device appears to be commented out of your /etc/fstab. You will need to remove it from there for hda-diskmount to be able to mount it.
</div>
 
This might occur if you have made changes to the drive configuration order after you installed Amahi. If you want to stay with the reconfigured drive order, instructions on how to fix this are in the next section, Manually setting up the disk mount order.
 
==Test Hard Drive==
Optionally, you can test your new drive for bad blocks.<br/>
Note that this step can take a ''long'' time to complete! You'll probably want to start it in the evening, to have it completed in the morning.
 
To do so, [[Open Terminal as root|in a Terminal, as root]], type the following command. Replace <strong style="color:green">sdb1</strong> with the (green) value you received from hda-diskmount.
 
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">
e2fsck -cn /dev/<strong style="color:green">sdb1</strong>
</div>
You'll receive a warning that says The line in <span style="WARNING!!! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage. Do you really want to continue (y/n)?color:#0000FF">'''BLUE'''<br/span>Answer is what you need to copy and add to the bottom of ''yes/etc/fstab''. The -cn option we This is '''REQUIRED'''re using can safely for the hard drive(s) to be used on permanently mounted filesystems.
=Use Hard Drive=There will be multiple lines for multiple hard drive(s) added. Ensure you copy and add '''ONLY''' those which were not present in the ''before.txt'' file.
You have a choice here on how to use your The new hard drive storage spacecan be used for [[Adding_a_second_hard_drive_to_your_HDA#All Shares|All Shares]], [[Adding_a_second_hard_drive_to_your_HDA#Some Shares|Some Shares]], or the [[Adding_a_second_hard_drive_to_your_HDA#Greyhole Storage Pool|Greyhole Storage Pool]]. We'll offer some examples Follow the guidance below based on desired usage for each hard drive.
==All sharesShares==Host '''ALL''' shares on the new hard drive.
If you want Move all your the shares data to be on your the new hard drive, herereplacing path in 's how to do that''<span style="color: red;">RED</span>''' with the path from the ''hda-diskmount'' output line in <span style="color:#0000FF">'''BLUE'''</span>.<br />
First, you'll want to move all you previous shares data, if any, into your new drive.<br/>You only need to do this next command if you have data that you care about in the /var/hda/files/* folders.<br/>[[Open Terminal as root|In a Terminal, as root]], type execute the following command. Replace the path in red with the path you received when you ran hda-diskmount.:
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">
mv /var/hda/files/* <strong style="color:red">/var/hda/files/drives/drive1/</strong>
</div>
You'll get a warning about "cannot move `/var/hda/files/drives' to a subdirectory of itself"; that is fine, ignore that.
Next, you:'''NOTE:''' There may be a '''WARNING''' that can be ignored indicating ''ll need to unmount your new hard drive, and remount it as /var/hda/files/drives cannot be moved to a subdirectory of itself''.
Unmount the new hard drive:
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">
umount /var/hda/files/drives/drive1/
</div>
Mount the new hard drive permanently as ''/var/hda/files'' by editing ''/etc/fstab'':<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">
nano /etc/fstab
</div>
Add the line to ''/etc/fstab'' provided in the ''hda-diskmount'' output in '''<span style="color: blue;">BLUE</span>''' and change the second value (path) to ''/var/hda/files''.
In nano, you'll need to add a new line at the bottom. Take the line that :EXAMPLE hda-diskmount gave you (the blue one), and change the second value output (the pathOriginal).<br/>Replace the second value with '''/var/hda/files'''. hda-diskmount gave me:<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;"> <span style="color:blue;">UUID=9d972abc547b073d-1639e591-44df4913-a60eb4fb-668618d40236 7c5084353979 <strong>/var/hda/files/drives/drive1</strong> ext4 defaults 1 2</span></div> So I should add this instead:<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; backgroundEXAMPLE hda-colordiskmount output (Modified): #E6F2FF; margin: 3px 3px 1em 3px;"> UUID=9d972abc547b073d-1639e591-44df4913-a60eb4fb-668618d40236 7c5084353979 <strong>/var/hda/files</strong> ext4 defaults 1 2</div> Make sure you do '''not''' change anything else from the blue line you received from hda-diskmount.<br/>It might not be the same thing as the above example; you need to use the values you've received. Save and exit nano (CTRL-X, Y, ENTER), and try your new mount:
:EXAMPLE /etc/fstab:
#
# /etc/fstab
# Created by anaconda on Sat Nov 9 01:46:39 2013
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=1ebbf241-528c-465e-889f-acc15400dd8c / ext4 defaults 1 1
UUID=087b15a5-c3ca-4615-b6ee-bf5f399a803e /boot ext4 defaults 1 2
UUID=75346b8e-b162-458c-b0e9-a8d48ec2bc82 swap swap defaults 0 0
UUID=ad85eeb9-18f0-4b85-9bfa-b88a5d1489b3 swap swap defaults 0 0
<span style="color:#0000FF">'''UUID=547b073d-e591-4913-b4fb-7c5084353979 /var/hda/files ext4 defaults 1 2'''</span>
Finally, execute the following:
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">
mount -a
ls /var/hda/files/
</div>
 That The last command should show you will display contents of the content of you new hard drive. That's it. All your shares in /var/hda/files are now located on your the new hard drive.
==Some Shares==
Host '''SOME''' shares on the new hard drive.
If you want only Move some of your shares data to be on your the new hard drive, hereby executing the following command (replace path in '''<span style="color: red;">RED</span>''' with the path from the ''hda-diskmount'' output line in <span style="color:#0000FF">'''BLUE'''s how </span>; sharename will be the share to do thatmove to the new drive).<br />
First, you'll want to move your previous shares data, if any, into your new drive.<br/>You only need to do this next command if you have data that you care about in the /var/hda/files/* folders (that you want on the new drive).<br/>[[Open Terminal as root|In a Terminal, as root]], type execute the following command. Replace the path in red with the path you received when you ran hda-diskmount. Replace '''something''' with the name of the share you want to have on your new drive (the share should already exist).:
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">
mv /var/hda/files/<strong>somethingsharename</strong> <strong style="color:red">/var/hda/files/drives/drive1/</strong>
</div>
Repeat the process with every share to be moved to the new drive.
Repeat with every share you want on your Unmount the new hard drive. Next, you'll need to make the mount permanent:
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">
umount /var/hda/files/drives/drive1<br/> nano /etc/fstab
</div>
In nano, youMount the new hard drive permanently by editing ''ll need to add a new line at the bottom. Take the line that hda-diskmount gave you, and insert that.<br/> So, following previous examples, I should add thisetc/fstab'': <div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px; text-align: left;"> <span style="color: blue;">UUID=9d972abc-1639-44df-a60e-668618d40236 nano /varetc/hda/files/drives/drive1 ext4 defaults 1 2</span>fstab
</div>
Add the line to ''/etc/fstab'' provided in the ''hda-diskmount'' output in '''<span style="color: blue;">BLUE</span>'''.
:EXAMPLE /etc/fstab:
#
# /etc/fstab
# Created by anaconda on Sat Nov 9 01:46:39 2013
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=1ebbf241-528c-465e-889f-acc15400dd8c / ext4 defaults 1 1
UUID=087b15a5-c3ca-4615-b6ee-bf5f399a803e /boot ext4 defaults 1 2
UUID=75346b8e-b162-458c-b0e9-a8d48ec2bc82 swap swap defaults 0 0
UUID=ad85eeb9-18f0-4b85-9bfa-b88a5d1489b3 swap swap defaults 0 0
<span style="color:#0000FF">'''UUID=547b073d-e591-4913-b4fb-7c5084353979 /var/hda/files/drives/drive1 ext4 defaults 1 2'''</span>
Verify the hard drive(s)/partition(s) configuration is correct in ''/etc/fstab''.
Save and exit nano (CTRL-XNext, Y, ENTER), and try your new mountexecute the following
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">
mount -a
ls /var/hda/files/drives/drive1
</div>
The last command will display contents of the new hard drive. All shares are now located on the new hard drive.
That last command should show you '''<u>HDA Dashboard Update</u><br />'''The location of each share that was moved to the content of you new hard drivewill need updated. Select ''Setup'' followed by the ''Shares'' section. Expand each share that was moved individually and change the location (path) accordingly.
NowFor example, you need to update the original movies location of the moved shares within Amahi. Go to your was <strongspan style="color:red">Amahi Dashboard/var/hda/files/movies</strongspan>, click on but the new location might be <strongspan style="color:blue">Setup</strong>, then <strong>Sharesvar/hda/files/drives/drive1/movies</strongspan>.
Click on one of the Repeat for any other shares that you have moved. This will open a panel revealing the share settings. Click on the location (the bit that is shown with a dotted underline) and it will change to an edit box. Update the location to match the new share locationhard drive. Verify these shares are accessible from another machine within your network.
For example, the original movies location was'''NOTE: <span style="color:red">/var/hda/files/movies</span><br/>The new location might be: <span style="color:blue">/var/hda/files/drives/drive1/movies</span> Repeat for any other shares that you have moved. Check that you can access these shares from another machine within your network. Finally, if you have ''' If any services that depend on the location of these sharesa moved share, make sure ensure they are configured to use the new share location. For example, if you have a [https://www.amahi.org/apps/dlna DLNA server ] is installed, check its the configuration files file to make sure that verify it can find any media folders that have been movedthe new share location. Secondly, <em>check validate that that all such services start correctly and behave as expected</em>. If the service doesn't start, it may be that it is testing 's looking for a specific share location during the service startup. Check the startup files in <strong>/etc/init.d</strong> to see if this is the case. That's it. Your share(s) are now on your new hard drivestart up.
==Greyhole Storage Pool==
Use new hard drive for [[Storage_pooling|Greyhole Storage Pool]].
If you want to add your new hard drive to your Greyhole storage pool, here's how to do that. First, you'll need to make the mount permanent. [[Open Terminal as root|In a Terminal, as root]], type mount the following commandnew hard drive permanently by editing ''/etc/fstab'': <div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;"> umount /var/hda/files/drives/drive1
nano /etc/fstab
</div>
Add the line to ''/etc/fstab'' provided in the ''hda-diskmount'' output in '''<span style="color: blue;">BLUE</span>'''.
:EXAMPLE /etc/fstab:
#
# /etc/fstab
# Created by anaconda on Sat Nov 9 01:46:39 2013
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=1ebbf241-528c-465e-889f-acc15400dd8c / ext4 defaults 1 1
UUID=087b15a5-c3ca-4615-b6ee-bf5f399a803e /boot ext4 defaults 1 2
UUID=75346b8e-b162-458c-b0e9-a8d48ec2bc82 swap swap defaults 0 0
UUID=ad85eeb9-18f0-4b85-9bfa-b88a5d1489b3 swap swap defaults 0 0
<span style="color:#0000FF">'''UUID=547b073d-e591-4913-b4fb-7c5084353979 /var/hda/files/drives/drive1 ext4 defaults 1 2'''</span>
Verify the hard drive(s)/partition(s) configuration is correct in ''/etc/fstab''.
In nano, you'll need Refer to add a new line at the bottom. Take [[Greyhole#Amahi 6|Greyhole (Amahi 6)]] for Ubuntu or [[Greyhole#Amahi 7|Greyhole (Amahi 7)]] for Fedora to configure the line that hda-diskmount gave you, and insert that[[Storage_pooling|Greyhole Storage Pool]].<br/>
So, following previous examples, I should add this:=Verify/Test=Verify the hard drive/partition is mounted.
[[Open Terminal as root|In a Terminal, as root]], execute the following:<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px; text-align: left;"> <span style="color: blue;">UUID=9d972abc-1639-44df-a60edf -668618d40236 /var/hda/files/drives/drive1 ext4 defaults 1 2</span>h
</div>
Save and exit nano (CTRL-X, Y, ENTER), and try your new mount:EXAMPLE: Filesystem Size Used Avail Use% Mounted on /dev/sda5 16G 4.3G 11G 30% / devtmpfs 493M 0 493M 0% /dev tmpfs 498M 84K 498M 1% /dev/shm tmpfs 498M 364K 498M 1% /run tmpfs 498M 0 498M 0% /sys/fs/cgroup tmpfs 498M 1.1M 497M 1% /tmp /dev/sda1 190M 75M 102M 43% /boot /dev/sdb1 917G 398G 473G 46% /var/hda/files/drives/drive1
<div style="border: 1px solid #A3B1BF; padding: The hard drive(s) and the mount point (path) should be listed for each hard drive added.5em 1em; background-color: #E6F2FF; margin: 3px 3px 1em 3px;"> mount -aIf not, then further investigation will be needed to determine the problem.<br /div>
'''<u>Ubuntu</u>'''<br />=Tips=Finally, you'll need to configure Greyhole to select your new partition. To configure Greyhole, Advanced Settings must be enabled under [http://hda/setup?sub=settings&tab=setting Setup &gt; Settings]Mount Order==The following guide will outline how to manually order hard drives and mount them automatically on boot.
[[Open Terminal as root|In the [http://hda/setup?sub=disk_pooling&tab=share Shares &gt; Storage Pool page] of your Amahi dashboard, you'll see a list of mounted partitionsTerminal, with checkboxes next to each, allowing you to include those partitions in your storage pool. You should now have a new row in thereas root]], referring to /var/hda/files/drives/drive1. Select it (click executing the checkbox). That's it. Your new hard drive just increased your Greyhole storage pool capacity. '''<u>Fedora 19</u>'''<br />Refer to [[Amahi_7_Create_Manual_Greyhole_Setup|Amah 7 Greyhole Setup]] for guidance. ==Setup Disk Mount Order (Ubuntu)==The following will outline how command to manually order your disks and mount drives automatically on boot. 1. First, get obtain the UUID for each hard drive by opening a terminal and entering command :<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;"> blkid<pre/div>gstreet@gstreet-MicroServer:~$ sudo blkid[sudo] password for gstreetEXAMPLE: /dev/sda1: LABEL="Seagate-Alpha2TB" UUID="55d9333f-d801-425a-b2af-d65c5966d56f" TYPE="ext4" /dev/sdb1: LABEL="Seagate-Beta2TB" UUID="5bd5498f-30c1-4780-948e-ca46656507d2" TYPE="ext4" /dev/sdc1: LABEL="WD-Charlie2TB" UUID="a7337504-376a-4d36-9f7a-1a24c0f55fbd" TYPE="ext4" /dev/sdd1: LABEL="WD-Delta2TB" UUID="8d881dcb-8de3-4621-b9bd-00025196868a" TYPE="ext4" /dev/sde1: LABEL="root" UUID="4d6f8004-d190-4234-a03b-b68de988abf0" TYPE="ext4" /dev/sde3: LABEL="home" UUID="d0531fa1-9311-4d53-b838-f35898adbd98" TYPE="ext4" /dev/sde5: LABEL="swap" UUID="3c39206c-ba60-47ff-a1fe-f5821b2ab543" TYPE="swap"</pre></div> In this case, the user has four data drives (sda1, sdb1, sdc1, sdd1) and the Operating system assigned to a fifth drive, sde.
Take note of In this case, there are four data drives (sda1, sdb1, sdc1, sdd1) and the UUID's for each Operating system assigned to a fifth drive, sde. Easiest to cut and paste UUID's straight from the terminal - no typo's!
2. Then edit /etc/fstab to mount Take note of the UUID's for each drive - for novices, easiest to do this using a graphical editor. You might consider first making a copy called fstab.bak (use the "save as" command, close file Easiest to cut and then gedit the original fstab again) so that you can recover paste UUID's straight from the original fstab file if you make mistakesterminal.
Edit ''/etc/fstab'' to mount each drive:
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">
sudo nano /etc/fstab
</div>
Then '''very carefully''' add the following line for each disk into the end of the fstab file. Ensure correct UUID, hard drive number and hard drive file system (ext4 in this case) are added.
3. Then '''very carefully''' add the following line for each disk into the end of the fstab file. Make sure you paste in the right UUID, drive number and drive file system (ext4 in this case).  <div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; marginEXAMPLE: 3px 3px 1em 3px;"> UUID=55d9333f-d801-425a-b2af-d65c5966d56f /var/hda/files/drives/drive1 ext4 defaults 1 2</div>
It should look something like the following when lines are added for each of the five drives in this example. Note lines beginning with # are comments where the remainder of the line is ignored)
<div style="border: 1px solid #A3B1BF; paddingEXAMPLE: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">
# Mounting Greyhole Drives for Drive Pool.
#
#
#
 
:'''NOTE:''' Lines beginning with # are comments where the remainder of the line is ignored
 
Verify there are no issues by executing the following:
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">
mount -a
</div>
If there are errors,most likely a line was not added properly. If this is not corrected, the machine may not boot and hang trying to mount the hard drives!
 
Once there are no errors, reboot machine:
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">
reboot
</div>
Verify the hard drives have successfully mounted in the '''HDA Dashboard'''.
 
If all drives mounted successfully, it should look something like this (Ubuntu):
 
:EXAMPLE:
[[File:Gstreet_greyhole_pool.png|options|caption]]
 
==Bad Blocks==
Optionally, you can test your new drive for bad blocks.<br/>
 
:'''NOTE:''' This can take a ''long'' time to complete! Recommend starting it in the evening so it will be completed the next day.
Save the file and quit the editor. To see if that will work at boot time[[Open Terminal as root|In a Terminal, as root]], try execute following command (replace '''sdb1''' withthe (<strong style="color:blue">BLUE</strong>) value you received from ''hda-diskmount''):
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px;">
mount e2fsck -acn /dev/'''sdb1'''
</div>
You'll receive a message stating '''WARNING!!!''' ''Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage. Do you really want to continue (y/n)?''<br/>
 
Answer ''yes''. The <code>-cn</code> option we're using can safely be used on mounted file systems.
==Spin Down Hard Drives==
 
Low power is a good thing to have in servers. If you do not use your server very often, you may want to force the hard drives to spin down faster than the default. Here is how.
 
First ensure ''hdparm'' package is installed:
sudo dnf install hdparm
 
To force to spin down after 10 minutes of being idle, add these lines to <code>/etc/rc.local</code>:
<pre>
# power drives down after 10 minutes idle
/sbin/hdparm -S120 /dev/sda
/sbin/hdparm -S120 /dev/sdb
...
</pre>
If that gives you errors, there is a good chance that Most drives will power down on their own without doing this line was not added properly and your machine may not reboot and get stuck mounting the drives!.
Note that Once stopped, the drive may take as long as 30 seconds to respond to a subsequent disk access, though most drives are much quicker. The encoding of the hda-diskmount command had already added lines S timeout value is somewhat peculiar. A value of zero means "timeouts are disabled": the device will not automatically enter standby mode. Values from 1 to 240 specify multiples of 5 seconds, yielding timeouts from 5 seconds to 20 minutes. Values from 241 to 251 specify from 1 to 11 units of 30 minutes, yielding timeouts from 30 minutes to mount my OS drive which had two partitions (root or /5.5 hours. A value of 252 signifies a timeout of 21 minutes. A value of 253 sets a vendor-defined timeout period between 8 and 12 hours, and home)the value 254 is reserved. Save file and close255 is interpreted as 21 minutes plus 15 seconds. Note that some older drives may have very different interpretations of these values.
4It may make the system run cooler and power efficient (especially on a Home Server you are rarely using all of the pool drives at the same time) Save file and reboot machine.
5) Check that drives have successfully mounted in Amahi =Troubleshooting===hda (Setup - Shares diskmount==If ''hda- Storage Pool)diskmount'' does not mount the hard drive or you prefer to do it manually, complete the following steps:
In this caseCreate the mount point (choose one '''NOT''' in use) [[Open Terminal as root|in a Terminal, if all as root]] by executing the following:<blockquote><div style="border: 1px solid #A3B1BF; padding: .5em 1em; background-color: #E6F2FF; margin: 3px 3px 1em 3px;"> mkdir -p /var/hda/files/drives mounted successfully, it should look like/drive1</div></blockquote>Identify the hard drive to mount and copy the UUID from the output that corresponds to the hard drive (i.e. sdb)<blockquote><div style="border: 1px solid #A3B1BF; padding: .5em 1em; background-color: #E6F2FF; margin: 3px 3px 1em 3px;"> ls -l /dev/disk/by-uuid/</div></blockquote>
:EXAMPLE: lrwxrwxrwx 1 root root 10 Dec 29 18:10 1b8597e0-5d95-4474-b093-53099c8c81c9 -> ../../sda1 lrwxrwxrwx 1 root root 10 Dec 29 18:10 1c161033-c695-4291-aba1-257d3987edf7 -> ../../dm-0 lrwxrwxrwx 1 root root 10 Dec 29 18:10 b7017251-cb54-438b-92a3-781537c565e6 -> ../../sdb lrwxrwxrwx 1 root root 10 Dec 29 18:10 c1fe62b3-41dc-4a67-8a6b-09f90b7893ba -> ../../dm-1 lrwxrwxrwx 1 root root 10 Dec 29 18:10 e0f5a9bd-f52b-431e-89af-61da70659bdd -> ../../dm-2 lrwxrwxrwx 1 root root 10 Dec 29 18:10 <span style="color:#FF0000">'''547b073d-e591-4913-b4fb-7c5084353979'''</span> -> ../../sdb1 :The UUID for sdX1 (i.e. sdb1 is <span style="color:#FF0000">'''RED'''</span>).Add the following to the end of ''/etc/fstab'', replacing the UUID as captured in the previous step<blockquote><div style="border: 1px solid #A3B1BF; padding: .5em 1em; background-color: #E6F2FF; margin: 3px 3px 1em 3px;"> nano /etc/fstab</div></blockquote>:EXAMPLE: # # /etc/fstab # Created by anaconda on Sat Nov 9 01:46:39 2013 # # Accessible filesystems, by reference, are maintained under '/dev/disk' # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # UUID=1ebbf241-528c-465e-889f-acc15400dd8c / ext4 defaults 1 1 UUID=087b15a5-c3ca-4615-b6ee-bf5f399a803e /boot ext4 defaults 1 2 UUID=75346b8e-b162-458c-b0e9-a8d48ec2bc82 swap swap defaults 0 0 UUID=ad85eeb9-18f0-4b85-9bfa-b88a5d1489b3 swap swap defaults 0 0 <span style="color:#0000FF">'''UUID=547b073d-e591-4913-b4fb-7c5084353979 /var/hda/files/drives/drive1 ext4 defaults 1 2'''</span> :The new entry will be mounted as ''/var/hda/files/drives/drive1'' (i.e. sdb1 in '''<span style="color:#0000FF">BLUE</span>''') Mount the hard drive<blockquote><div style="border: 1px solid #A3B1BF; padding: .5em 1em; background-color: #E6F2FF; margin: 3px 3px 1em 3px;"> mount -a</div></blockquote>:If all goes well, there should not be any output. If there are errors, stop and diagnose the problem. Accomplish [[Adding_Hard_Drives_101#Verify/Test|Verify/Test]] step to ensure the hard drive is properly mounted.<br /> Repeat this process for each hard drive to be mounted. ==Partitions > 2.1TB==If by following this tutorial you are unable to mount hard drives with partitions > 2.1TB, refer to the [[FilePartitions_Over_2.1_TB|Partitions over 2.1TB]] guidance. =Help=If you need assistance, please post in the [https:Gstreet_greyhole_pool//forums.png|options|captionamahi.org Amahi Forums]or receive '''LIVE''' support on the [http://talk.amahi.org Amahi IRC channel].
12,424

edits