* Next go to a machine on your network that you want to install the printer. For Windows, from the ''run'' option, enter '''\\hda''' followed by your user ID and password if required.

[[image:Printer1.PNG]]

* You should see the printer now.

[[image:Printer2.PNG]]

*Right click on the printer and select connect. Answer '''Yes''' to install when it prompts to install the printer.

[[image:Printer3.PNG]]

[[image:Printer4.PNG]]

*You should now see the add printer wizard. If your driver is in the list, select it. Otherwise, select Have Disk and point it to your drive where the printer driver disk is located.

[[image:Printer5.PNG]]

* Once you install the driver, you can check the Printers and Faxes to see if it is installed. Although it says “Access denied, unable to connect” it is working. For some reason, it only periodically displayes “Ready” on my machine, but it is connected. You should be able to print a test page. If works well, you should see a test page in a matter of seconds.

[[image:Printer6.PNG]]

This worked great on my network, but may require some additional adjustments for others. For more assistance, see the FAQ regarding how to attach a printer to the HDA.