Difference between revisions of "Amahi 8 Troubleshooting"

From Amahi Wiki
Jump to: navigation, search
Line 8: Line 8:
  
 
this is probably because the system did not get a network connection working. This could be for a number of reasons, including bad cabling, connecting the network cable to the wrong interface or driver incompatibility. Make sure your connectivity and drivers are working well with the OS.
 
this is probably because the system did not get a network connection working. This could be for a number of reasons, including bad cabling, connecting the network cable to the wrong interface or driver incompatibility. Make sure your connectivity and drivers are working well with the OS.
 
=== New Disk Wizard not Mounting Drives ===
 
 
There is a bug in the [https://www.amahi.org/apps/disk-wizard Disk Wizard] application, where it sometimes does not mount the drives it formatted, at the end of the process.
 
 
TBD - how to mount them by hand
 
  
 
== Upgrade ==
 
== Upgrade ==

Revision as of 02:15, 30 September 2015

New Install

Could not resolve host: f21.amahi.org

If you get the error

 Could not resolve host: f21.amahi.org

this is probably because the system did not get a network connection working. This could be for a number of reasons, including bad cabling, connecting the network cable to the wrong interface or driver incompatibility. Make sure your connectivity and drivers are working well with the OS.

Upgrade

Virtualization Stack Breaks DNS/DHCP Server

This happens on some Fedora 19 to 21 upgrades, but also after installing desktop components or VNC.

After performing the upgrade, the DHCP/DNS server is not functional.

To verify if the service is functional do the following from a command line:

 sudo systemctl status dnsmasq.service

If its not working you will get a message similar to below with a failed status:

dnsmasq.service - DNS caching server.
Loaded: loaded (/usr/lib/systemd/system/dnsmasq.service; enabled)
Active: failed (Result: exit-code) since Tue 2015-09-08 10:38:40 MST; 6s ago
Process: 7798 ExecStart=/usr/sbin/dnsmasq -k (code=exited, status=2)
Main PID: 7798 (code=exited, status=2)


This may be caused somehow by libvirtd having being installed during the upgrade to F21. Unfortunately, libvirtd uses dnsmasq for virtual machines in a way that conflicts with Amahi 8. To verify this is the issue do the following commands:

 sudo lsof -i :53
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
dnsmasq 1308 nobody 6u IPv4 20640 0t0 UDP localhost.localdomain:domain
dnsmasq 1308 nobody 7u IPv4 20641 0t0 TCP localhost.localdomain:domain (LISTEN)
 ps -ef| grep <number in bold above>
nobody 1308 1 0 10:04 ? 00:00:00 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --dhcp-script=/usr/libexec/libvirt_leaseshelper
root 1309 1308 0 10:04 ? 00:00:00 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --dhcp-script=/usr/libexec/libvirt_leaseshelper

if you see something like --conf-file=/var/lib/libvirt/dnsmasq/default.conf then you can fix the dnsmasq problem by issuing the following command and then rebooting.

 sudo systemctl disable libvirtd
 sudo reboot