Build Machine for Amahi Express

From Amahi Wiki
Jump to: navigation, search
Msgbox-WOPr.png Work In Progress
This article is currently undergoing major expansion or restructuring. You are welcome to assist by editing it as well. If this article has not been edited in several days, please remove this template.


Please Note:

  • Since this article is a "work in progress", information in this article will be fluid for sometime, your patience will be appreciated. The author has never been down this path before.
  • Any advice or suggestions you may have please post to the Amahi Wiki "Express Disc" Forum.
  • The "Category" link, "Amahi Express Collection", at the bottom of this page provides links to other reference information relating to the "Amahi Express" subject area.

This article contains specifications, construction steps, and implementation information for a "build machine" for the "Amahi Express Installation Disc". The intent of the machine is to aid in the development and building of new Amahi Express Installation disc images.

Recommended Configuration

  • Latest full version of the Fedora ( this article will reference Fedora 18 ) DVD.
  • As modern of a computer as possible ( machine for this article used: Intel Core 2 Duo @ 3.0 GHz, 4GB RAM, 160 GB Hard Disk ).
  • External storage facility ( i.e. external USB drive (1 TB?), Amahi share, Amahi ownCloud directory) with storage greater that the size of the build machine.
  • Backup software ( author used CloneZilla Livd CD with 1TB external drive) to store last working build machine image.
  • Lots of patience, a meticulous nature, know how to consult "Dr. Google" (a lot).

Fedora Installation

When installing Fedora it will be assumed that a "Desktop installation" path will be performed. Following are recommendations to be considered during the installation process.

  • During the installation select the GNOME GUI environment, at some point it will be required in the disc build process.
  • Highly recommend installing some GNOME extensions (GNOME Extensions) in order to provide a "classic windowing" environment.
  • The Fedora "Anaconda Installer" has changed completely since Fedora 14. A "Hub and "Spoke" node model is used for it now instead of a "wizard-like" install. Please make sure all nodes (i.e. network config.) are properly configured before proceeding with the installation.
  • Here is a disk partitioning plan to consider:
 /boot partition: "standard partition"(no LVM), ext3 format, size 250 MB ( Fedora recommendation).
  swap partition: "standard swap (no LVM)", swap format, size 2 times existing system RAM ( i.e. 2 x 4GB = 8GB ).
 /(root partition): LVM partition, ext4 format, size set to the remaining space for the hard drive(s).
  • Ensure that Fedora updates are done after the DVD installation.
  • Create "mount points" for use later.
bash code
​mkdir -p /media/optdrive mkdir -p /media/usbdrive mkdir -p /media/usbstick​

Local Fedora Repositories

To reduce the amount of software packages that might have to be downloaded during a disc build process, local Fedora "base" and "updates" repositories should be used. These local repositories (repos) have an added advantage, the build machine can receive its' software updates ( i.e. yum -y update ) from them.

The repos in this example will be stored in the "/opt" directory. What is this directory normally used for? I am so glad you asked. 

According the the "Filesystem Hierarchy Standard" (FHS) definition:

"The root directory for Software Collections is normally located in the "/opt/ directory" to avoid possible
 conflicts between Software Collections and the base system installation."

 It is recommended to have the directory hierarchy conform to the following layout: 

  /opt/provider/application-version/

  where: - "provider" is the provider (vendor) name registered with the Linux Foundation.
         - "application-version" indicates the software collection version. This can be done via one name
           or an ordered organization of subdirectories.

Construct the Repositories

  • Start a "terminal session" and switch to the "root" user.
  • Create local repository directory structures.
bash code
​mkdir -p /opt/fedora/f18/i386/base mkdir -p /opt/fedora/f18/i386/updates​
  • Mount the Fedora DVD.
bash code
​mount -o loop /dev/sr0 /media/optdrive​
  • Copy rpm packages to the local "base" repo directory structure.
bash code
​cp -av /media/optdrive/Packages/* /opt/fedora/f18/i386/base​
  • Copy the main "comps xml" file to the local repo directory structure.
bash code
​cp /media/optdrive/repodata/*comps*.xml /opt/fedora/f18/i386/base/comps.xml​
  • Install the "createrepo" utility.
bash code
​yum -y install createrepo​
  • Go to the local "base" repo and generate the "base" repo files.
bash code
​cd /opt/fedora/f18/i386/base<br> createrepo .​
Please notice the "dot" after createrepo, it's important.
  • Populate the "updates" repo.
 /bin/rsync -auvrt --delete --exclude=debug/ --exclude=drpms/ rsync://mirrors.kernel.org/fedora/updates/18/i386/
  /opt/fedora/f18/i386/updates
Please note this will take several hours to complete. Do it at night and check the next day.
  • Go to "updates" repo and generate the "updates" repo files.
bash code
​cd /opt/fedora/f18/i386/updates<br> createrepo .​

Create the "yum" Repository Files

  • Start a terminal sessions and switch to the root user.
  • Go to the /etc yum configuration directory.
bash code
​cd /etc/yum.repos.d​
  • Using a text editor create the "f18-base-local.repo" file and insert the following text, and then save the file.
Text
​[f18-base-local] name=Fedora 18 local base repository baseurl=file:///opt/fedora/f18/i386/base gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-18-primary enabled=1​
  • Using a text editor create the "f18-updates-local.repo" file and insert the following text, and then save the file.
Text
​[f18-updates-local] name=Fedora 18 local updates repository baseurl=file:///opt/fedora/f18/i386/updates gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-18-primary enabled=1​
  • Disable all of the existing default repositories by editing each ".repo" file and setting "enabled=0" (from 1).

Test the Repositories

  • Start a terminal sessions and switch to the root user.
  • Enter the following commands.
bash code
​yum clean all yum repolist​
  • Something like this with other stuff will be displayed.
Text
​repo id f18-base-local f18-updates-local​

Refreshing a Repository

  • Now the updates repo will need to be updated on a regular basis. This can be done manually or a script file that is run on a nightly basis with the following commands.
# rsync to download new rpms

/bin/rsync -auv --delete --exclude=debug/ --exclude=drpms/ rsync://mirrors.kernel.org/fedora/updates/18/i386/ /opt/fedora/f18/i386/updates

# go to the updates directory and rebuild the repo database

cd /opt/fedora/f18/i386/updates
createrepo .


Retrieved from "https://wiki.amahi.org/index.php?title=Build_Machine_for_Amahi_Express&oldid=70172"