Changes

From Amahi Wiki
Jump to: navigation, search
2,921 bytes added ,  03:06, 12 November 2018
__NOTOC__{{MessageBox|backgroundcolor = #faa|image =Warning.png|heading =WARNING|message = Amahi 7 for Fedora 19<br />Maintenance Support ONLY!Please use a supported release!}}This guidance is provided as an '''unsupportedUNSUPPORTED''' install of Amahi 7 on Fedora 19 using a USB flash drive. It requires manual configuration to install [[Amahi_7|Amahi 7]] and configure [http://www.greyhole.net/ Greyhole]. The '''officially supported instructions''' can be found at [http://docs.amahi.org here].
<u>PREREQUISITES</u>=Prequisites=
* USB Flash Drive (2GB minimum)
* [http://unetbootin.sourceforge.net/ UNetbootin] (download supports Windows/Linux/Mac OS])<br />'''NOTE:''' Ensure your system meets the [http://unetbootindocs.sourceforgeamahi.netorg/unetbootin-windows-latestrequirements.exe herehtml minimum requirements])for Amahi before proceeding.
=Create USB image (='''NOTE:''' These instructions are based on a Windows)=client, but easily adaptable to MAC or Linux. * Insert USB flash drive into Windows your computer.
* Run UNetbootin
* Select ''' Download the appropriate version depending on your system:** [http://archive.fedoraproject.org/pub/archive/fedora/linux/releases/19/Live/i386/Fedora-Live-Desktop-i686-19-1.iso Fedora''' for Distribution19 Live (32-bit)]* Choose '''19_Live * [http://archive.fedoraproject.org/pub/archive/fedora/linux/releases/19/Live/x86_64/Fedora-Live-Desktop-x86_64-19-1.iso Fedora 19 Live (3264-bit)]* Select '''Diskimage' or ''and '19_Live_X64 (64-bit)'ISO'' depending on your system.for format* Browse to select the file you downloaded
* Verify at the bottom
** Type is '''USB Drive'''
** Drive listed is for your USB flash drive. If not, select the appropriate drive.
* Once you are ready, choose '''OK'''. Please be patient as this may take a while since it downloads extracts the files and then extracts them ISO to the USB flash drive.
* When UNetbootin finishes, select '''Exit''' and remove the USB flash drive.
=Install on ServerFedora=
* Insert the USB flash drive into your server.
* Now boot your server using the USB flash drive. Some BIOS have function keys that allow you to choose the boot media. Others may require changes to the BIOS.
** Install to Hard Drive
* Select '''Install to Hard Drive'''.
* Configure the options as you desire, i.e. Time Zone, Hard Drive[[Hard_Drive_Partition_Scheme|hard drive partition scheme]]. When finished, select '''Begin Installation'''.
* Now you will see the options to set a root password and/or create a user. You '''MUST''' do one of the following:
** Set a root password and create a user.
** Once the login screen appears, you can remove the USB flash drive and log in using the password for the user set during install.
<br />
<blockquote><b>NOTE:</b> Most commands from her here on will need to be executed as a privileged user. Depending on how you configured the users at install, you may need to precede them with '''sudo''' (made user administrator). Otherwise, you will need to be '''root''' user.</blockquote> 
= Enable SSH (Optional)=
We need to enable SSH for remote access. If you don't intend to access your HDA remotely inside or outside your network via [http://en.wikipedia.org/wiki/Secure_Shell SSH], you can skip this step.
* Execute the following as a privileged user (precede commands with '''sudo''' if not run as '''root ''' user):
systemctl start sshd.service
= Connectivity =
Ensure you can connect to the internet before proceeding. On the HDA, open Firefox and try to access a web page'''Install Amahi 7''' section.
* Install network tools: yum -y install net-tools * Next try pinging a web site such as google.com: ping google.com * You should see something similar to the following (proceed to the '''Install Amahi 7''' section):<pre>PING google.com (74.125.225.2) 56(84) bytes of data.64 bytes from ord08s12-in-f2.1e100.net (74.125.225.2): icmp_seq=1 ttl=51 time=17.6 ms64 bytes from ord08s12-in-f2.1e100.net (74.125.225.2): icmp_seq=2 ttl=51 time=16.2 ms64 bytes from ord08s12-in-f2.1e100.net (74.125.225.2): icmp_seq=3 ttl=51 time=15.1 ms64 bytes from ord08s12-in-f2.1e100.net (74.125.225.2): icmp_seq=4 ttl=51 time=15.9 ms</pre> * If you can’tdid not get a successful ping, edit the following file:
vi /etc/resolv.conf
Now check again and if you can access the internet, proceed to the next section. Otherwise, further troubleshooting will be required.
= Install Amahi 7 = Follow the guidance for [[Amahi_7_full_DVD|hereAmahi 7 Full DVD]] for installing starting with the [[Amahi_7_full_DVD#Install_Amahi|Install Amahi]] section.<!--These steps can be performed via SSH or on the HDA in terminal mode. * Install required packages: Start with rpm -Uvh <nowiki>http://f19.amahi.org/noarch/hda-release-6.9.0-1.noarch.rpm<u/nowiki>Install yum -y install mariadb-libs mariadb-server yum -y install hda-ctl hda-platform* Next we need to manually execute the installer (substitute your install code): hda-install YOUR-INSTALL-CODE* If all goes well, you should be asked to reboot.* Once the machine is rebooted, open a web browser on a client machine.** Enter the IP address of the Amahi repo by handHDA.** The dashboard should appear shortly.<br />--> <b>NOTE:</ub> section. If you need to add additional hard drives, follow refer to the guidance for [[Adding_a_second_hard_drive_to_your_HDA|adding additional drives]]. This includes procedures for the new 3 & 4 TB drives.
= Install Greyhole (Optional) =
Currently there is no Dashboard addAmahi application [https://www.amahi.org/apps/greyhole-on ui Greyhole UI] provides this capablity. '''NOTE:''' If you would still like to setup and configure your Greyhole for Amahi 7. This must be done pool manually using the , please see [[Amahi_7_Create_Manual_Greyhole_SetupAmahi_Create_Manual_Greyhole_Setup|Manual Greyhole Setup]] wiki page= Install Complete =Amahi 7 should be installed and working as designed. Recommend you reboot the HDA next to verify all is working correctly. = Customizations (Optional)=You can disable the GUI and boot headless. You can also remove the boot splash screen as well. <b>NOTE:</b> All of the steps require privileged user environment (root user or precede commands with sudo). * Disable GUI on boot: rm -rf /etc/systemd/system/default.target ln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.target  * Restore GUI on boot: rm -rf /etc/systemd/system/default.target ln -sf /lib/systemd/system/graphical.target /etc/systemd/system/default.target  * Remove boot splash: ** Edit /etc/default/grub** Add '''#''' to beginning of '''GRUB_CMDLINE_LINUX''' line:** Rebuild GRUB menu: grub2-mkconfig -o /boot/grub2/grub.cfg * Restore boot splash:** Edit /etc/default/grub** Remove '''#''' from beginning of '''GRUB_CMDLINE_LINUX''' line.** Rebuild GRUB menu: grub2-mkconfig -o /boot/grub2/grub.cfg * You will need to reboot to complete the changes. reboot 
Amahi 7 should not be installed and working as designedReference: [http://unix. Recommend you reboot the HDA next to verify all is working correctlystackexchange.com/questions/60938/disabling-x-server-on-fedora-17 Disabling X Server on Fedora 17]
12,424

edits