= Reconnect the Greyhole storage pool after re-install of Fedora / Amahi =
<!--After re-install, recreate all your shares exacty as they were.<br>Add the shares to the storage pool.<br>As root, run greyhole --fsck.<br>This will recreate the symlinks in the landing zone If you upgrade and/var/hda/files.<br>-->* Disconnect all data drives before you or reinstall. This will prevent you from destroying them by mistake during the Fedora/Amahi install!* Install Amahi per the regular instructions.* Connect the data drives, and use hda-diskmount need to remount all of them.Note that if you can, it would be faster if you can re-mount the get your drives in the same paths they used to have. '''Example:''' If you have one 1TB and one 2TB, and the 1TB was mounted as /var/hda/files/drives/drive1, and the 2TB was mounted as /var/hda/files/drives/drive2, it would be better to re-mount that like that with data on your new HDA. If you mount them otherwise, it will still work, but Greyhole will work a while to re-build the links in your share before they can be usable.* Select the drives in the Amahi Dashboard: Setup > Shares > Storage Pool* Re-create your shares in the Amahi Dashboard: Setup > Shares.Make sure to select 'Use Pool'new system, and select the correct number of extra copies.If you don't remember all the shares you had, just check inside the 'gh' folder found at the root of your drives to get a reminder! '''Example:'''{{Code|ls -1 /var/hda/files/drives/*/gh/ <nowiki>|</nowiki> grep -v : <nowiki>|</nowiki> sort -u}} * Launch a fsck to have Greyhole rebuild your shares.{{Code|greyhole --fsck}} Until follow this completes, some of your files will be missing from your shares [[Reconnect_existing_Greyhole_storage pool]] guide.
= Greyhole Troubleshooting =
