Difference between revisions of "Hard Drive Partition Scheme"

From Amahi Wiki
Jump to: navigation, search
Line 15: Line 15:
 
= How to Partition=
 
= How to Partition=
 
At the partitioning point of the Fedora installer in the Amahi Express 7 CD install (or the [[Amahi 7 full DVD]] install), you do this:
 
At the partitioning point of the Fedora installer in the Amahi Express 7 CD install (or the [[Amahi 7 full DVD]] install), you do this:
* Select '''Create Custom Layout''' and click '''Next'''.
+
* Select '''INSTALLATION DESTINATION''' under ''STORAGE''.
* Next delete ''lv-root'', ''lv-swap'', and ''vg_xxxxxxx'' by selecting one at a time and clicking '''delete''' (''xxxxxx'' is different on every machine).
+
* Verify the correct drive is selected, then choose '''Done'''.
* Now delete '''ALL''' partitions under hard drives. Now you will see free space as the size of the drive.
+
* Ensure '''Partition scheme''' reflects ''Standard Partition''.
* First we need to make the swap.  Click on the free space and click '''Create''':
+
* Choose ''I want to review/modify my disk partitions before continuing'' and select '''Continue'''.
# On the menu select '''standard partition'''.
+
* When prompted with '''INSTALLATION OPTIONS''', select ''Custom partitioning''.
# Go to file system type and click '''Swap'''.  
+
* Choose each partition and select the '''minus''' (-) to remove them individually until all the partitions have been removed.
# The recommended size of a swap partition depending on the amount of RAM in your system. For example, if you have 1GB of ram and plenty of HDD space, make it 2GB Fixed size and select OK.
+
# If prompted ''Are you sure you want to delete all the data on...'', choose '''Delete it'''
 
+
# Ensure ''Delete all other filesystems in the Unknown root as well'' is selected.
 +
* You should now see the message ''You haven't created any mount points for your Amahi 7.1 installation yet''.
 +
* First we need to make the swap.  Click on the plus (+) and a window will appear:
 +
# Choose '''Mount Point''' of ''Swap''.
 +
# Enter '''Desired Capacity''' based on the chart below.
 +
# Select '''Add mount point'''.
 +
::'''NOTE:''' The recommended size of a swap partition depending on the amount of RAM in your system. For example, if you have 1GB of ram and plenty of HDD space, make it 2GB Fixed size and select OK.
 
::{|class="wikitable"
 
::{|class="wikitable"
 
!System RAM
 
!System RAM
Line 39: Line 45:
 
|4GB of swap space
 
|4GB of swap space
 
|}
 
|}
 
+
* Next is /boot.  Click on the plus (+) and a window will appear:
* Click '''Create''' again, and we will make a ''/boot'' mount point:
+
# Choose '''Mount Point''' of ''/boot''.
# Click free space and select '''Create'''.
+
# Enter '''Desired Capacity''' of ''500MB''.
# Choose '''Standard Partition''' and under mount point select ''/boot''.
+
# Select '''Add mount point'''.
# Select '''Ext4''' for file system type.  Should be 500MB, but not less than 200MB and click '''OK'''.
+
* The last one is the / (root) partition.  Click on the plus (+) and a window will appear:
* The last one, the ROOT partition (recommend it be the rest of the disk):
+
# Choose '''Mount Point''' of ''/''.
# Just click free space, and '''Create''' one more time.
+
# Enter '''Desired Capacity''' of ALL remaining disk space (note the remaining disk space at the bottom of the installer window)
# For mount point select ''/''.
+
# Select '''Add mount point'''.
# File system type select '''Ext4''' under leave the size box alone.
+
* Review the partition scheme and if it looks ok, choose '''Done''' and select '''Accept changes'''.
# Select '''Fill to Maximum allowable size''' to use up the rest of the disk.  
 
* Click '''NEXT''' and select '''Write Changes to Disk'''
 
  
  

Revision as of 17:49, 2 January 2015

Warning.png WARNING
Recommend you disable/unplug ALL hard disks you do not want to put the system on to make it easier to partition. Data loss can result if you accidentally get confused about what disks are which or you make an error.


The Amahi team makes the following recommendations when partitioning drives in Amahi 7:

  • Skip using Logical Volume Management (LVM), which creates added complexity for inexperienced users, in particular if there are disk failures.
  • Do not make a separate /home partition. Amahi does not recommend use of /home for storage for users
  • Allocate the majority of hard drive space in the / (root) partition.
  • Do not add extra drives while installing. recommend you do that later after the system is up and running successfully using adding a second hard drive to your HDA as a guide.
  • The majority of space, to be used by file shares is set up to be at /var/hda/files, which typically resides in the root partition.
  • If you plan to use the Greyhole drive pooling technology, keep in mind that by default the Greyhole "Landing Zone" will be located in the root partition. This needs to have enough space to accommodate the single largest transaction that you plan or foresee you will make.

How to Partition

At the partitioning point of the Fedora installer in the Amahi Express 7 CD install (or the Amahi 7 full DVD install), you do this:

  • Select INSTALLATION DESTINATION under STORAGE.
  • Verify the correct drive is selected, then choose Done.
  • Ensure Partition scheme reflects Standard Partition.
  • Choose I want to review/modify my disk partitions before continuing and select Continue.
  • When prompted with INSTALLATION OPTIONS, select Custom partitioning.
  • Choose each partition and select the minus (-) to remove them individually until all the partitions have been removed.
  1. If prompted Are you sure you want to delete all the data on..., choose Delete it
  2. Ensure Delete all other filesystems in the Unknown root as well is selected.
  • You should now see the message You haven't created any mount points for your Amahi 7.1 installation yet.
  • First we need to make the swap. Click on the plus (+) and a window will appear:
  1. Choose Mount Point of Swap.
  2. Enter Desired Capacity based on the chart below.
  3. Select Add mount point.
NOTE: The recommended size of a swap partition depending on the amount of RAM in your system. For example, if you have 1GB of ram and plenty of HDD space, make it 2GB Fixed size and select OK.
System RAM Recommended swap space
< 2GB 2 times the amount of RAM
> 2GB – 8GB Equal to the amount of RAM
> 8GB – 64GB 0.5 times the amount of RAM
> 64GB 4GB of swap space
  • Next is /boot. Click on the plus (+) and a window will appear:
  1. Choose Mount Point of /boot.
  2. Enter Desired Capacity of 500MB.
  3. Select Add mount point.
  • The last one is the / (root) partition. Click on the plus (+) and a window will appear:
  1. Choose Mount Point of /.
  2. Enter Desired Capacity of ALL remaining disk space (note the remaining disk space at the bottom of the installer window)
  3. Select Add mount point.
  • Review the partition scheme and if it looks ok, choose Done and select Accept changes.


You can now continue with the install as normal.


Reference: Fedora Recommended Partitioning Scheme