* Select '''Create Custom LayoutINSTALLATION DESTINATION''' under ''STORAGE'' and click .* Verify the correct drive is selected, then choose '''NextDone'''.* Next delete Ensure '''Partition scheme''' reflects ''lv-rootStandard Partition'', .* Choose ''lv-swapI want to review/modify my disk partitions before continuing'', and select ''vg_xxxxxxx'Continue' by selecting one at a time and clicking ''.* When prompted with '''deleteINSTALLATION OPTIONS''' (, select ''xxxxxxCustom partitioning'' is different on every machine).* Now delete Choose each partition and select the '''ALLminus''' (-) to remove them individually until all the partitions under hard driveshave been removed. Now # If prompted ''Are you sure you will want to delete all the data on...'', choose '''Delete it'''# Ensure ''Delete all other filesystems in the Unknown root as well'' is selected.* You should now see free space as the size of the drivemessage ''You haven't created any mount points for your Amahi 7.1 installation yet''.* First we need to make the swap. Click on the free space plus (+) and click a window will appear:# Choose '''Mount Point''Create'of '':Swap''.# On the menu select Enter '''standard partitionDesired Capacity'''based on the chart below. # Go to file system type and click Select '''SwapAdd mount point'''. # ::'''NOTE:''' The recommended size of a swap partition depending on the amount of RAM in your system. For example, if you have 1GB of ram and plenty of HDD space, make it 2GB Fixed size and select OK. 

 * Next is /boot. Click on the plus (+) and a window will appear:# Choose '''CreateMount Point''' again, and we will make a of ''/boot'' mount point:# Click free space and select '''Create'''.# Choose Enter '''Standard PartitionDesired Capacity''' and under mount point select of ''/boot500MB''.# Select '''Ext4''' for file system type. Should be 500MB, but not less than 200MB and click '''OKAdd mount point'''.* The last one, is the ROOT / (root) partition . Click on the plus (recommend it be the rest of the disk+)and a window will appear:# Just click free space, and Choose '''CreateMount Point''' one more time. # For mount point select of ''/''. # File system type select Enter '''Ext4Desired Capacity''' under leave of ALL remaining disk space (note the remaining disk space at the size box alone.bottom of the installer window)# Select '''Fill to Maximum allowable sizeAdd mount point''' to use up the rest of the disk. * Click Review the partition scheme and if it looks ok, choose '''NEXTDone''' and select '''Write Changes to DiskAccept changes'''.