IPSec VPN Windows Client

From Amahi Wiki
Jump to: navigation, search

Windows 7

Currently, Amahi only supports one IPSec VPN client for windows, a free client from Shrew Soft. (Report others that also work well please)

  • Download and install the Shrew Soft Client. (Their Windows VPN Client download page may have more recent versions.)
  • Open the client, called VPN Access Manager and click on + (Add) to add a configuration
  • Enter YOURNICK.yourhda.com. Replace YOURNICK with your actual HDA nickname, so that your DynDNS works.

 

  • Go into the Authentication tab
  • Select Mutual PSK + XAuth
  • Under the Local Identity tab, select Key Identifier, enter Amahi (this is called the Group Name and acts as an extra layer of protection)

 

  • In the Credentials tab, the Pre Shared Key should be ready to take the VPN secret obtained in the VPN web page inside your HDA.
  • The rest of things should work as default
  • Save

 

  • Finally click on connect or double click on the profile for your VPN
  • Input your username and password for a user in your Amahi HDA

 

  • If all goes well, you should be connected and you should see this welcome message:

 

  • Press OK. To disconnect, close this window or press on Disconnect.
  • For easy use, these are the recommended settings
  • Enable it to be visible in the Tray only, so that it's less obtrusive when it connects
  • If this is a computer you trust, you may want to also set the "remember the connection username", for even easier use