Difference between revisions of "Install troubleshooting"

From Amahi Wiki
Jump to: navigation, search
Line 52: Line 52:
  
 
= Network not available after reboot =
 
= Network not available after reboot =
See [https://bugs.amahi.org/issues/2046 Amahi Bug #2046] for details.
+
Sometimes it takes 2 or 3 reboots before the networking starts working properly.  See [https://bugs.amahi.org/issues/2046 Amahi Bug #2046] for details.
 +
 
 +
= Installer Crashes =
 +
Installer crashes with non-Intel raid system (see [https://forums.amahi.org/viewtopic.php?p=38957&sid=315004eeba97ed605d4886d6b3f2cdd9#p38957 forum post] for details)

Revision as of 00:34, 25 May 2017

Failed to synchronize cache for repo 'xxxxxx'

If your system cannot seem to "synchronize" and get proper packages during installation, it may be that your system's date and time are way off and not current.

One way to get time/date to be up to date automatically is doing so via the network. Here is how to do it by running these commands as root (directly or via sudo):

  dnf -y install chrony
  systemctl enable chronyd
  systemctl start chronyd

Shortly after these are run, the system time should be up to date and installing packages should work.

/dev/root does not exist

Some have reported an error similar to the following while attempting to install Fedora on a machine that was previously used for Windows 10:

[ OK ]Started Show Plymouth Boot Screen.
[ OK ]Reached target path.
[ OK ]Reached target Basic System.
[23.073611] blk_update_request: I/O error. dev sr0, sector 850520
[23.240764] blk_update_request: I/O error. dev sr0, sector 850520
[23.270797] Buffer I/O error on dev sr0, logical block 106315, async page read
[ OK ]Started Show Plymouth Boot Screen.
[ OK ]Reached target path.
[ OK ]Reached target Basic System.
     Starting Dracut Emergency Shell...
Warning: /dev/root does not exist

Generating "/run/inittramfs/rdsosreport.txt"

This appears to be related to UEFI firmware associated with the hardware. Refer to More on booting: a practical Fedora UEFI guide, and don’t use “universal” USB stick writers for the solution.

Cannot access HDA Dashboard

Some have had problems accessing the HDA Dashboard after a new install.

  • If you are using a Windows client, check that it's getting the DHCP lease and DNS from the HDA. To do so, from Windows Client command line do:
ipconfig /all
If the IP address and/or DNS is not from the HDA, then that's your issue. Probably something related to your router settings.
  • Check that the web server is running on the HDA. From command line, do:
sudo systemctl status httpd
If it's not running, try to start it:
sudo systemctl start httpd
If there are errors, then recommend you do an OS update:
sudo dnf update
Reboot and then check things again.

This mainly applies to those doing an upgrade, but executing the following commands has helped some users:

systemctl stop firewalld
systemctl disable firewalld
systemctl stop rolekit
systemctl disable rolekit

Network not available after reboot

Sometimes it takes 2 or 3 reboots before the networking starts working properly. See Amahi Bug #2046 for details.

Installer Crashes

Installer crashes with non-Intel raid system (see forum post for details)