3,789
edits
Changes
From Amahi Wiki
Network troubleshooting (view source)
Revision as of 06:17, 25 February 2015
, 06:17, 25 February 2015no edit summary
If you do not have connectivity, you may want to check that the settings that you programmed in amahi.org for your network and router match that of your actual network and the router in it. Amahi assumes a regular, typical home network and the settings there should be done to match what you have. The most common error is that the gateway is not set up properly. We have a page on how to [[Find Your Gateway IP]].
Please note that '''only the first NIC/ethernet card (eth0)''' is supported out of the box. If you have two, please make sure you use eth0 for disable the LAN where one not used in your Amahi HDA residesnetwork. There is an unsupported way a final critical step to support amahi on the [[ETH1|eth1Transition to Amahi]] devicefor your network. Your clients need to be using Amahi for DNS for it all to be working as expected.
= Amahi 7 (Fedora 19) Prerequisite =
