Networking - Static IPs

From Amahi Wiki
Revision as of 13:32, 9 July 2010 by Repat (talk | contribs)
Jump to: navigation, search

You can assign static IP address to machines in your network, however, most modern machines will ask for a name to DHCP and that will work all the time regarless of the IP it gets.

However, if you need to set IP addresses, you can do it from the

      Setup -->   Networking  -->  Static IPs

And follow the prompts after pressing in the New Static IP.

You will need to enter:

A NAME for your device, that will be added to the Domain e.g. Laser_printer.home.com

An IP address in the range of 1-99, e.g. 192.168.1.20

The MAC address of the device (in the form 00:11:22:33:44:55)

Your client should remain set up as DHCP, but will be assigned this "Static" IP the next time it is rebooted or the DHCP lease is released/renewed.