PXE KNIFE

• Get the latest tar from http://pxeknife.erebor.org/releases/
• migrate to /usr/share/hda-app-pba/tftp/
• untar the pxeknife ( tar -xvf pxeknife.tar.gz )
• run " yum install syslinux "
• run " cp -rf /usr/lib/syslinux/*.c32 /usr/share/hda-app-pba/tftp/ "
• now go to /usr/share/hda-app-pba/tftp/pxelinux.cfg/
• run "mv default default.old"
• pico default
• add this to the file

  
        DEFAULT menu.c32
	PROMPT 0
	TIMEOUT 100 #this is optional - will start the default after 10 seconds
	MENU TITLE --== Main Menu ==--

	#this allows you to exit the pxe stack and pass booting to the local system
	LABEL bootlocal
		MENU DEFAULT
		MENU LABEL Local Boot
		localboot 0

	#load pxe knife
	LABEL pxeknife
		MENU LABEL PXE Knife --->
		kernel menu.c32
		append pxeknife/pxeknife.conf

• Now you should be ready to do a netboot.

• Add PBA to boot options - still needs to be tested
• Installing OS though pxeknife - every operating system is different. After downloading the iso. You need to find the kernel(vmlinuz, linux, ...) and the intrid (.gz, .... ). Below we will document different OS. If you have installed an OS that is not mentioned please add it for others to be able to do it.