4
edits
Changes
From Amahi Wiki
m
→How to Add New Drives to An Existing Raid5
#*<blockquote>su -</blockquote>
#*<blockquote>fdisk -l</blockquote>
#*What you are looking for is probably going to be something like /dev/sd**some letter**. In my case, since I installed Fedora on one hard drive first before installing my 3 other disks RAID disks, the above command returns that I have disks labelled /dev/sda /dev/sdb /dev/sdc and /dev/sdd. I, of course, won't be using the hard drive on which I installed Fedora (/dev/sda), so my array will be created using the /dev/sdb /dev/sdc and /dev/sdd disks.
#Unmount the partitions:
#*<blockquote>umount /dev/sdb</blockquote>
That is it! Enjoy your new large storage array!
= How to Add New Drives to An Existing Raid5 =
As i I had to find out , adding a drive to a Raid5 RAID 5 is easy.
Adding the drive to the RaidRAID
mdadm --add /dev/md# /dev/sd# (# is the number of the drive you adding)
Growing The RaidRAID
mdadm --grow --raid-devices=# /dev/md$
(# is the total number of the drives in the array and $ is the raid array RAID)
Now we let the Raid array RAID rebuild and we can watch it reshape by Typingtyping:
watch cat /proc/mdstat
It will take a couple hours for the drive to reshape (PLEASE do not reboot the machine during the reshaping process)
After the reshape finished successfully , we need to make sure that the mdadm.conf has the correct drive number in it.
nano /etc/mdadm.conf
Mdadm.conf written out by anaconda
MAILADDR root
ARRAY /dev/md0 level=raid5 num-devices=10 XX UUID=4cc02637:e3832bed:bfe78010:bc810f(where num-devices= XX needs to be changed to the actual number of drives you have in the array)
Save and close nano: [ctrl+x]
Reboot the machine after the reshape has finished and you made the changes to make sure the machine boots correctly
