Transmission

From Amahi Wiki
Jump to: navigation, search

Automatically Download to a Share

  • When you install Transmission from your Amahi dashboard, the torrents share will be created automatically.
  • Torrent files added to this share directory are also automatically added to Transmission to download. This is done every 5 minutes via /etc/cron.d/amahi-torrent-watch Cron job.
  • Change the following portion of the file as desired (*/5 = 5 minutes):
*/5 * * * *

Change download location (Amahi 7)

  • If you prefer to create a different share or change the location of torrent downloads, you will need to modify the automatic download script.
  • Edit /usr/share/transmission/torrentwatch.sh and change the following lines to your desired location:
for file in /var/hda/files/torrents/*.torrent
and
if [ "$file" != "/var/hda/files/torrents/*.torrent" ]; then

Automatic download script (Amahi 7)

  • To change the logging or saving of torrents, you will need to modify the script below (located in /usr/share/transmission directory):
    • Remove >> /var/log/torrentwatch.log to disable logging.
    • Change mv "$file" "$file".added" to "rm -f "$file" to prevent saving torrents with .added extension.
#!/bin/bash
for file in /var/hda/files/torrents/*.torrent
do
if [ "$file" != "/var/hda/files/torrents/*.torrent" ]; then
echo [`date`] "$file" added to queue. >> /var/log/torrentwatch.log
/usr/bin/transmission-remote localhost:9091 -a "$file"
mv "$file" "$file".added
sleep 1
fi
done

Add Transmission Web Client Password

NOTE: Do all tasks as root user

1. Stop the Transmission service:

service amahi-transmission stop

2. Edit the settings.json.

nano /var/lib/transmission/.config/transmission-daemon/settings.json

3. Edit these fields, remembering the username and password

"rpc-authentication-required": true,                                        
"rpc-bind-address": "0.0.0.0",                                              
"rpc-enabled": true,                                                        
"rpc-password": "[Insert wanted password]",        
"rpc-port": 9091,                                                           
"rpc-username": "[Username wanted]",

CTRL-X to save.

4. Restart Transmission Service

service amahi-transmission restart

5. Next, we need to make sure that the cronjob that automatically loads torrents from the torrents share uses the same user authentification.

  • (Amahi 6 ONLY) Edit /etc/cron.d/amahi-transmission-watch and change the following:
*/5 * * * *     transmission    transmission-remote localhost:9091 -a /var/hda/files/torrents/*.torrent && rm -f /var/hda/files/torrents/*.torrent
add "--auth [username]:[password]" so the line becomes:
*/5 * * * *     transmission    transmission-remote localhost:9091 --auth [username]:[password] -a /var/hda/files/torrents/*.torrent && rm -f /var/hda/files/torrents/*.torrent
  • (Amahi 7 ONLY) Edit /usr/share/transmission/torrentwatch.sh and change the following:
/usr/bin/transmission-remote localhost:9091 -a "$file"
add "--auth [username]:[password]" so the line becomes:
/usr/bin/transmission-remote localhost:9091 --auth [username]:[password] -a "$file"
  • The username and password are the ones you entered as rpc-username and rpc-password. Now navigate to web address and input information and you're all set!

Change Downloaded Files Permissions

By default, transmission sets the file permissions of downloaded files so that only the transmission user can write to the downloaded files and folders. To change this, modify the settings as follows:

1. Stop the transmission server from the Amahi Control Panel. Be sure to disable the watchdog timer as well.

2. Edit /var/lib/transmission/.config/transmission-daemon/settings.json:

vim /var/lib/transmission/.config/transmission-daemon/settings.json

3. Find the line: umask: 18, and change it to umask: 2. This will enable all users in the transmission group to also write to the file.

4. Restart transmission from the Amahi Control Panel (Settings/Servers/Transmission Server/Restart) for the changes to take effect. Remember to check the watchdog timer as well.

Adding Transmission to users group

This prevents the "Error: permission denied /file_location/file_name" error when starting a torrent.

GUI method:

1. Go to System -> Administration -> Users and Groups
2. Enter your root password
3. Click on Edit -> Preferences
4. Make Sure "Hide System users and groups" is unchecked and close the dialog box
5. In the list of Users find "transmission" and double click
6. In the Groups tab find "users" and make sure it is checked.
7. Close all windows.

Terminal method:

1. Open Terminal
2. Type

su

3. Enter your root password
4. Type

usermod -G users transmission

5. Close Terminal

Adding User To Transmission Group

You may run into a problem where even after adding transmission to the users group, that you cannot delete or modify files downloaded from Transmission. If this happens, you can add the user(s) you want to modify the downloaded files by running the follow command as root replacing "admin" with the user you want to add:

usermod -a -G transmission admin

Note: You need to stop the transmission-daemon service and watchdog before running the above command, and a restart of the server may be necessary, just remember to restart the service and watchdog first.

Prevent Transmission Email Reports

Transmission installs a cronjob that checks a preset folder every xx minutes for torrent files. If a torrent-file is present it will automatically start the download for you and delete the torrent file. In some cases you might receive email reports when the folder is empty. You can edit the cronjob to make sure no reports are sent when the cronjob is run.

  • cronjob can be found at /etc/cron.d/amahi-transmission-watch
  • Add >/dev/null 2>&1 to the end all command lines and reports will not be sent in the future.

Transmission with HTTPS Trackers (Ubuntu)

Ubuntu 12.04 64bit currently suffers from this bug in libgnutls26 which prevents Transmission communicating with SSL trackers. In order to fix this run the following commands.

wget http://ftp.uk.debian.org/debian/pool/main/g/gnutls26/libgnutls26_2.12.20-1_amd64.deb
sudo dpkg -i libgnutls26_2.12.20-1_amd64.deb


For a list of available mirrors see here

Manual Transmission Install (Fedora 14)

1. Open a terminal window and install the latest version of Transmission available in the Fedora repository as root:

su
yum install transmission

2. Go to System -> Preferences -> Startup Applications. In the "Startup Programs" tab, click the "Add" button. In the window that pops up, fill in the values as follows:

- Name: Transmission
- Command: transmission-gtk %F
- Comment: Transmission BitTorrent Client

3. Launch Transmission by going to Applications -> Internet -> Transmission BitTorrent Client. Now go to Edit -> Preferences. In the "Torrents" tab, tick "Automatically add torrents from" and choose a folder in one of your shares that you'd like to use as your "torrent landing pad". For example, you could create a share called "Torrents" and have a folder in that share called "Torrent Files". Any torrent files that you copy to this folder will be automatically loaded and started by Transmission.

4. Also on this tab, tick "Start when added" and "Move .torrent file to trash". Untick "Show options dialog". Set your "Save to Location" to a folder in one of your shares. For example, if you have a share called "Torrents", you could use a folder in that share called "Completed Torrents".

 

5. Go to the "Web" tab and tick "Enable web client". It is recommended that you also tick "Use authentication" and choose a username and password for access to Transmission on your network.

 

6. Go through the rest of the tabs and set up everything as you'd like it (e.g. download & upload speed limits).

7. To control Transmission from other computers on your network, you can use the web interface. To access this, type the following into your browser (replace "hda" with the name or IP address of your Amahi server):

http://hda:9091

8. Another option that gives you more control over your torrents is to install Transmission Remote GUI on your client computer(s). It can be downloaded from here:

http://code.google.com/p/transmisson-remote-gui/downloads/list

9. Once installed, start Transmission Remote GUI and go to Tools -> Connection Options. In the "Connection" box, type "HDA" or whatever you wish. In the "Connection" tab, fill in the values as follows:

- Remote Host: hda
- Port: 9091
- User name: <user name chosen in step 5>
- Password: <password chosen in step 5>

NOTE: Replace "hda" with the name or IP address of your Amahi server.

 

10. In the "Paths" tab, you'll need to enter path mappings for the folders you've set torrents to download to. For example, if you're using a share called "Torrents", you'll want to enter the following:

/var/hda/files/Torrents=\\hda\Torrents

 

11. To start downloading a torrent, you can either:

a) Copy/download a .torrent file to the folder you specified under "Automatically add torrents from" in step 5.

b) Open a .torrent file or magnet link with Transmission Remote GUI.

c) Open a .torrent file or enter a torrent URL in the Web Interface.