Difference between revisions of "Ubuntu Installation Troubleshooting"

From Amahi Wiki
Jump to: navigation, search
Line 1: Line 1:
= Loss of Network Connectivity =
+
== Loss of Network Connectivity ==
 
Double check your network settings with '''<code>ifconfig</code>''' and '''<code>route -n</code>'''. These should be the settings that you use in the installation. If these are not correct you can change the ip address by issuing the command
 
Double check your network settings with '''<code>ifconfig</code>''' and '''<code>route -n</code>'''. These should be the settings that you use in the installation. If these are not correct you can change the ip address by issuing the command
 
             {{Code|sudo ifconfig eth0 192.168.1.14 netmask 255.255.255.0 up}}
 
             {{Code|sudo ifconfig eth0 192.168.1.14 netmask 255.255.255.0 up}}

Revision as of 00:23, 6 July 2012

Loss of Network Connectivity

Double check your network settings with ifconfig and route -n. These should be the settings that you use in the installation. If these are not correct you can change the ip address by issuing the command

bash code
​sudo ifconfig eth0 192.168.1.14 netmask 255.255.255.0 up​

assuming 192.168.1.14 is your IP address. The route can be changed with

bash code
​sudo route add default gw 192.168.1.1​

assuming 192.168.1.1 is the address of your router.

This is especially important if you are doing a headless install