Difference between revisions of "Ubuntu Installation Troubleshooting"

From Amahi Wiki
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
= Loss of Network Connectivity =
+
== Loss of Network Connectivity ==
 
Double check your network settings with '''<code>ifconfig</code>''' and '''<code>route -n</code>'''. These should be the settings that you use in the installation. If these are not correct you can change the ip address by issuing the command
 
Double check your network settings with '''<code>ifconfig</code>''' and '''<code>route -n</code>'''. These should be the settings that you use in the installation. If these are not correct you can change the ip address by issuing the command
            {{Code|sudo ifconfig eth0 192.168.1.14 netmask 255.255.255.0 up}}
+
sudo ifconfig eth0 192.168.1.14 netmask 255.255.255.0 up
 
assuming 192.168.1.14 is your IP address. The route can be changed with
 
assuming 192.168.1.14 is your IP address. The route can be changed with
            {{Code|sudo route add default gw 192.168.1.1}}
+
sudo route add default gw 192.168.1.1
 
assuming 192.168.1.1 is the address of your router.<br>
 
assuming 192.168.1.1 is the address of your router.<br>
  
 
This is especially important if you are doing a headless install
 
This is especially important if you are doing a headless install

Latest revision as of 15:47, 29 August 2015

Loss of Network Connectivity

Double check your network settings with ifconfig and route -n. These should be the settings that you use in the installation. If these are not correct you can change the ip address by issuing the command

sudo ifconfig eth0 192.168.1.14 netmask 255.255.255.0 up

assuming 192.168.1.14 is your IP address. The route can be changed with

sudo route add default gw 192.168.1.1

assuming 192.168.1.1 is the address of your router.

This is especially important if you are doing a headless install