Ubuntu Installation Troubleshooting

From Amahi Wiki
Revision as of 00:23, 6 July 2012 by Bigfoot65 (talk | contribs)
Jump to: navigation, search

Loss of Network Connectivity

Double check your network settings with ifconfig and route -n. These should be the settings that you use in the installation. If these are not correct you can change the ip address by issuing the command

bash code
​sudo ifconfig eth0 192.168.1.14 netmask 255.255.255.0 up​

assuming 192.168.1.14 is your IP address. The route can be changed with

bash code
​sudo route add default gw 192.168.1.1​

assuming 192.168.1.1 is the address of your router.

This is especially important if you are doing a headless install