= How to install Amahi Quick Install =

Step 1: Download and copy (using dd or similar) the Amahi ''rootfs''image into an empty USB hard drive, USB flash drive, or SD card (depending on what your device supports). Step 2: Boot your device using the drive or card you created in step 1. Step 3: Install Amahi, by loading http://plug_ip:2000 and entering the install code you got when you [https://www.amahi.org/user created your Amahi profile]. = Detailed Installation Instructions = == Step 1: Prepare your diskboot device == You'll need:* A bootable storage device, of 2GB or more* The latest Amahi ''rootfs'' from [http://dl.amahi.org/marvell/ http://dl.amahi.org/marvell/]* The script to copy the above ''rootfs' ' into your storage device: [http://dl.amahi.org/marvell/create-clean-f12-disk.sh http://dl.amahi.org/marvell/create-clean-f12-disk.sh] Connect your media boot device (usb diskUSB hard drive, USB flash drive, or SD card)into a working Linux machine and open .<br/>If needed, partition your preferred partitioning software (Gparted, fdisk,etc)device to create a partition you'll use to boot. Partition and No need to format the drive with your file system of choice (ext2,ext3,etc), the usual warnings apply all data will be lostit. <br/>If a swap partition is desired (highly recommended for the Dockstar)leave up to 512MB available, and format as Linux swap. Next, download the [http://dl.amahi.org/marvell/create-clean-f12-disk.sh script] and [http://dl.amahi.org/marvell/amahi-marvell-0.8.tar.bz2 Image] to the disk. Run the script and it will give a warning to edit the script to match your drive designation. This is what your disk is on the current machine (i.e. sdb1,sdc1), care should be taken here to correctly identify the disk or you could wipe the wrong disk. Now run the script and it will automagically prepare your disk.

== Step 2: '''Boot''' your plug == Boot the device with your newly created disk attached. Give it a few minutes to boot, and it will be ready for the Amahi installation. == Step 3: Install Amahi ==