There are three major steps in getting things going

: Download the [http://dl.amahi.org/marvell/ Amahi ''rootfs'' image] the use the script to extract and put it into an empty USB hard drive, USB flash drive, or SD card (depending on what your device supports). While you wait, setup a profile for your HDA at [http://www.amahi.org/ Amahi]

: Boot your device using the drive or card you created in step 1. Find out the IP it got assigned from your existing DHCP server (typically your router).

: Install Amahi, by loading <code>http://plug_ip:2000</code> and entering the install code you got when you [https://www.amahi.org/user created your Amahi profile].